Santa Claus And Snowman Amigurumi Free Crochet Pattern
As Christmas approaches, we share the most beautiful amigurumi christmas patterns. In this article, we shared the amigurumi santa claus pattern.
Abbreviations:
sc – single crochet
st – stitch
ch – chain stitch
Dec – sc next 2 stitches together
inc – sc in indicated stitch 2 times
rnd(s) – sl stround(s)
hdc – half double crochet
sl-st -slip stitch
Santa
Required materials and tools:
– Alize Bahar, Cotton Gold or Catania for body and dress. Alize Decofur for Santa’s beard.
– – Hook 2, 2-5 or 3 (or a needle of the correct size for the yarn being used). It will be 25-26 cm from the point of the cap to the foot, but the final size will depend on the size of the hook and the yarn you are working with.
– – Decor buttons (one for Santa’s ornament, sewn to Santa’s belt, a New Year’s hat or a snowman’s hat of any shape)
– – Red or white wire (you can buy it in art shops, hobby shops!). Replace this filling on Santa’s hand so she can bend. The same solution for a snowman
– – 10mm Snowman Nose Pompom at Creative Hobby Shop
– – a needle for sweating bags
Additional Information::
All parts of the body begin with the amigurumi ring technique – except for Santa’s feet – and then continue to work in a spiral, without closing the rows.
– Use markers to trace the rows.
– Fill in each piece continuously while crocheting.
– After the body parts have been made, cut the yarn, leaving a 20 cm end of the thread that can be used for sewing.
Head
(1 piece) – use flesh-colored yarn!
1. Row: 6 SC into magic ring.
2. Row: INC * (6x) {12 SC}
3. Row: 1SC, INC (6x) {18 SC}
4. Row: 2 SC, INC (6x) {24 SC}
5. Row: 3 SC, INC (6x) {30 SC}
6. Row: 4 SC, INC (6x) {36 SC)
7. Row: 5 SC, INC (6x) {42 SC}
8. Row: 6 SC, INC (6x) {48 SC}
9. Row: 7SC, INC (6x) {54 SC}
10-18. Row: 54 SC {54 SC}
19. Row: 7 SC, DEC (6x) {48 SC}
20. Row: 6 SC, DEC (6x) {42 SC}
21. Row: 5 SC, DEC (6x) {36 SC}
22. Row: 4 SC, DEC (6x) {30 SC}
We cut the yarn!
Sew the eyes after the figure is fully assembled. Over the nose. Place them on 1 row close to each other.
If you don’t like the embroidery, you can replace it with 6mm eye protection.
(Protective eyes are located between rows 11-12, with an interval of about 5 posts.).
When sewing eyes, always put them on the head after sewing the nose relative to it, but when using safety eyes, we will sew the nose after attaching the eyes.
Nose + ears
(flesh color):
They are made with the same number of loops, so we make 3 pieces!
1. Row: 5 SC into magic ring
2. Row: INC * (5x) {10 SC}
3. Row: (1 SC, INC) (5 x) {15 SC}
4. Row: 15 SC {15 SC}
5. Row: (1 SC, DEC) * (5x) {10 SC}
We cut the yarn, and after the body and head are sewn, it is worth to sew on the ears before putting on the hat. Sew the ears below the center line of the head so that they do not interfere with the exact fit of the cap.
After the nose is sewn on, you can tint it as you wish (using a blush, perhaps using a textile paint).
Beard:
Prepare a beard when the body and head are sewn, ears are sewn and a hat is sewn to the head.
We start behind the left ear, bypassing it with an eyelash thread on the front.
Take the yarn and start pulling the thread over the head behind the left ear (fasten), go down 6-7 rows to the bottom of the head and fasten the stitches. Going under the nose, he follows a horizontal line, then symmetrically to the starting line.
To enrich the beard, we do this step several times.
BODY:
(1 piece) Start with “trouser-colored” yarn.
1. Row: 6 SC INTO MAGIC RING
2. Row: INC * 6 {12 SC}
3. Row: (1 SC, INC) * (6x) {18 SC}
4. Row: (2 SC, INC) * (6x) {24 SC}
5. Row: (3 SC, INC) * (6x) {30 SC}
6. Row: (4 SC, INC) * (6x) {36 SC}
7. Row: (5 SC, INC) * (6x) {42 SC}
8. Row: (6 SC, INC) * (6 x) {48 SC}
9. Row: 48 SC {48 SC}
10. Row: (7 SC, INC) * (6x) {54 SC}
11.-13. Row: 54 SC {54 SC}
14. Row: (8 SC, INC) * (6 x) {60 SC}
15. Row: (9 SC, INC) * (6 x) {66 SC}
Change the color to dark brown or dark gray yarn (this will be a Santa Claus belt!)
16-18. Row: 66SC {66 SC}
Change the color to red (or any other color of your Santa’s jacket).
19. Row: (9SC, DEC) * (6x) {60 SC}
20-21. Row: 60SC {60 SC}
22. Row: (8 SC, DEC) * (6x) {54 SC}
23-24. Row: 54SC {54 SC}
25. Row: (7 SC, DEC) * (6x) {48 SC}
26. Row: 48SC {48 SC}
27. Row: (6 SC, DEC) * (6 x) {42 SC}
28. Row: 42 SC {42 SC}
29. Row: (5 SC, DEC) * (6x) {36 SC}
30. Row: 36 SC {36 SC}
31. Row: (4 SC, DEC) * (6x) {30 SC}
Switch to flesh color!
Row 32: 30 {30 SC}
Cut the yarn to leave a longer thread to sew the body and head together!
RIGHT HAND
(1 pcs):
Let’s start with the white thread !!
Row 1: 7 SC into magic ring
Row 2: INC * (7x) {14 SC}
Row 3: (1SC, INC) * (7x) {21 SC}
4-5. Row: 27SC {21 SC}
Row 6: 5 DEC, (4DC in 1 loop – POPCORN), 10 SC {16 SC}
Row 7: 16SC {16 SC}
Row 8: 1 DEC, 14 SC
Row 9: (3 SC, DEC) * (3x) {12 SC}
Row 10: (2 SC, DEC) * (3x) {9 SC} Change the color to “sweater color”!
11-27. Row: 9SC {9 SC} Crochet total: 153 SC
When trimming the yarn, leave enough yarn to sew on the hands.
LEFT HANDS (1 PC):
Let’s start with the white thread!
Row 1: 7 SC into magic ring
Row 2: INC * (7x) {14 SC}
Row 3: (1SC, INC) * (7x) {21 SC}
4-5. Row: 21SC {21 SC}
Row 6: (POPCORN (toe design) in 1 loop), 5DEC, 10 SC {16 SC}
Row 7: 16SC {16 SC}
Row 8: 1 DEC, 14 SC {15 SC}
Row 9: (3 SC, DEC) * (3x) {12 SC}
Row 10: (2 SC, DEC) * (3x) {9 SC} Change the color to “jacket color”
11-27. Row: 9SC {9 SC} Crochet total: 153 SC
Trimming the yarn, leaving enough yarn to sew on the hands.
Look Online – How To Crochet Popcorn
Legs
(2 PCS.):
Let’s start with shoe yarn!
Row 1: 7 CH, 2 from crochet, 4 SC, 4SC into 1, then REFER to the other side of the chain, 4 SC, 2 INC {16 SC}
Row 2: INC, 5 SC, 4INC ,, 5 SC, INC {22 SC}
Row 3: 2INC, 6 SC, 2INC, 4 SC, 2INC, 8 SC {28 SC}
4-5. Row: 28SC {28 SC}
Row 6: DEC, 25 SC {27 SC}
Row 7: 8 SC, 6DEC, 7 SC {21 SC}
Row 8: 7 SC, 4DEC, 6 SC {17 SC}
Row 9: 6 SC, 3DEC, 5 SC {14 SC}
Row 10: 6 SC, 2DEC, 4 SC {12 SC}
Row 11: (2 SC, DEC) * (3x) {9 SC}
Change the color of your pants!
12-16. Row: 9SC {9 SC} Spiral knit: 45 SC
Cap
(1 PC):
Red yarn!
Row 1: 6 SC into magic ring
Row 2: 6SC {6 SC}
Row 3: 1 SC, INC (3x) {9 SC}
Row 4: 9SC {9 SC}
Row 5: (2 SC, INC) * (3x) {12 SC}
Row 6: 12 SC {12 SC}
Row 7: (3 SC, INC) * (3x) {15 SC}
Row 8: 15 SC {15 SC}
Row 9: 4 SC, INC (3x) {18 SC}
Row 10: 18 SC in each person {18 SC}
Row 11: (5 SC, INC) * (3x) {21 pp}
Row 12: 21 SC {21 SC}
Row 13: (6 SC, INC) * (3x) {24 SC}
Row 14: 24 SC {24 SC}
Row 15: (7 SC, INC) * (3x) {27 SC}
Row 16: 27SC {27 SC}
Row 17: (8 SC, INC) * (3x) {30 SC}
Row 18: 30 SC {30 SC}
Row 19: (4 SC, INC) * (6x) {36 SC}
Row 20: 36 SC {36 SC}
Row 21: (5 SC, INC) * (6x) {42 SC}
Row 22: 42 SC {42 SC}
Row 23: (6 SC, INC) * (6x) {48 SC}
Row 24: 48 SC {48 SC} Change color to white yarn!
Row 25: (7 SC, INC) * (6x) {54 SC}
26-28. Row: 54 SC {54 SC}
Cutting off the yarn, leaving so much yarn that we could sew the cap to the head.
Sewing:
put the cap well over your head to fit.
The cap does not need to be stuffed, but if necessary we can insert the wire and then control where the cap is tilted.
Cap pompom (1 piece)
With white yarn!
Row 1: 5 SC into magic ring
Row 2: INC * (5x) {10 SC}
Row 3: (1 SC, INC) * (5x) {15p}
Row 4: 15 SC {15 SC}
Row 5: (1 SC, DEC) * (5x) {10 SC}
Row 6: DEC * 5 {5 SC} Tighten
Cut off the yarn, leaving just long enough to sew the tassel to the cap.
Scarf
(1 piece, any color)
Crochet, turn and, starting from 3 loops from the hook. We knit DC and go to the end of the chain. The ends of the scarf may be fringed.
SNOWMAN
Head
(1 pc) – use white yarn!
Row 1: 6 SC INTO MAGIC RING
Row 2: INC in each SC (6x) {12 SC}
Row 3: 1SC, INC (6x) {18 SC}
Row 4: 2 SC, INC (6x) {24 SC}
Row 5: 3 SC, INC (6x) {30 SC}
Row 6: 4 SC, INC (6x) {36 SC)
Row 7: 5 SC, INC (6x) {42 SC}
Row 8: 6 SC, INC (6x) {48 SC}
9-16. Row: 48 SC {48 SC}
Row 17: 6 SC, DEC (6x) {42 SC}
Row 18: 5 SC, DEC (6x) {36 SC}
Row 19: 4 SC, DEC (6x) {30 SC} Cut the yarn off!
Sew the eyes after the figure is fully assembled. Over the nose. Place them on 1 row close to each other.
If you don’t like the embroidery, you can replace it with 6mm eye protection.
(Safety eyes are located between rows 11-12, with an interval of about 5 posts.) You
You can use a creative 10mm nose pompom, but you can replace it with a crochet nose. ☺
Also embroider the smiling lips before joining the head and body.
Nose:
1. Row 1: 5 SC into magic ring
2. Row 2: INC in each SC (5x) {10 SC}
3. Row 3: (1 SC, INC) * (5x) {15p}
4. Row 4: 15 SC {15 SC}
5. Row 5: (1 SC, DEC) * (5x) {10 SC}
Body:
(1 piece) With white thread
Row 1: 6 SC into magic ring
Row 2: INC in each SC (6x) {12 SC}
Row 3: (1 SC, INC) * (6x) {18 SC}
Row 4: (2 SC, INC) * (6x) {24 SC}
Row 5: (3 SC, INC) * (6x) {30 SC}
Row 6: (4 SC, INC) * (6x) {36 SC}
Row 7: (5 SC, INC) * (6x) {42 SC}
Row 8: (6SC, INC) * (6x) {48p}
Row 9: 48 SC {48 SC}
Row 10: (7SC, INC) * (6x) {54SC}
11-13 Row: 54 SC {54 SC}
Row 14: (8 SC, INC) * (6x) {60 SC}
Row 15: 60 SC {60 SC} Change the color to the color of the snowman’s sweater!
Row 16: (8 SC, DEC) * (6x) {54 SC}
17 -18 Row: 54 SC {54 SC}
Row 19: (7SC, DEC) * (6x) {48p}
20-21 Row: 48 SC {48 SC}
Row 22: (6 SC, DEC) * (6x) {42 rev.}
23-24. Row: 42 SC {42 SC}
Row 25: (5 SC, DEC) * (6x) {36 SC}
Row 26: 36 SC {36 SC}
Row 27: (4 SC, DEC) * (6x) {30 SC}
Cut the yarn so that you leave a long thread to sew the body and head together!
Scarf
(1 piece, any color)
About CH 50, turn and starting at 3 sts from the hook, we knit through each chain link with DC to the end of the row. The ends of the scarf may be fringed.
Cap
(1 piece of any color):
Row 1: 6 SC into magic ring
Row 2: 6SC {6 SC}
Row 3: (1 SC, INC) * (3x) {9 SC}
4-6. Row: 9SC {9 SC}
Row 7: (2 SC, INC) * (3x) {12 SC}
8-10. Row: 12 SC {12 SC}
Row 11: (3 SC, INC) * (3x) {15 SC}
Row 12: 15 SC {15 SC}
Row 13: (4 SC, INC) * (3 x) {18 points}
Row 14: 18 SC {18 SC}
Row 15: (5 SC, INC) * (3x) {21 SC}
Row 16: 21 SC {21 SC}
Row 17: (6 SC, INC) * (3x) {24 SC}
Row 18: 24 SC {24 SC}
Row 19: (7SC, INC) * (3x) {27SC}
Row 20: 27 SC {27 SC}
Row 21: (8 SC, INC) * (3x) {30 SC}
Row 22: 30 SC {30 SC}
Row 23: (4 SC, INC) * (6x) {36 SC}
Row 24: 36 SC {36 SC}
Row 25: (5 SC, INC) * (6x) {42 SC}
Row 26: 42 SC {42 SC}
Row 27: (6 SC, INC) * (6x) {48 SC}
28-30. Row: 48SC (48 SC), cut yarn. Pull the cap over the snowman’s head and sew it on.
Cap tassel
(1 PC)
Make a yarn tassel to match the colors of the cap and sew on to the cap.
We can also crochet a tassel, in which case the snowman will have a hat similar to the Santa hat in the picture ☺
With white yarn!
Row 1: 5 SC into magic ring
Row 2: INC * (5x) {10 SC}
Row 3: (1 SC, INC) * (5x) {15p}
Row 4: 15 SC {15 SC}
Row 5: (1 SC, DEC) * (5x) {10 SC}
Row 6: DEC * 5 {5 SC} Tighten
Cut off the yarn, leaving just long enough to sew the tassel to the cap.
