Doll With Deer Hat Amigurumi Free Crochet Pattern
Amigurumi doll patterns are published free of charge on this site for you. I shared a wonderful amigurumi doll pattern in this article.
USED MATERIALS
YARNS
Madame cotton 059 – DARK BROWN
Madame cotton 057 – MISON
Madame cotton 029 – CHAMPAGNE
Madame cotton 009 – MARSALA
Etrofil jeans 040 – GREEN
Nako Paris – (Shimmering Mohair rope)
ACCESSORIES
12, 10 and 6 mm safe eye.
Needle
Bead Fiber
Band
Scissors
150 cm 2.5mm wire.
Plastic Sole for Shoes
USED TERMS
Ch- chain
INC- incrase
DEC- decrase
(…) * 6 Repeat what is written in parentheses as much as the number written on the right.
BLO- knit from the back of the loop
FLO- knit from the front of the loop
Sl-st- slip stitch
HDC- half double crochet
Dc- double crochet
Dcinc- double crochet incrase
If similar materials are used, the finished toy will be approximately 48 cm tall.
The materials I propose will help you knit the same toy that I knitted.
HEAD
1. 6sc with into magic ring
2.6 inc 12
3. (sc, inc) * 6 18
4.sc, inc (2sc, inc) * 5 sc 24
5. (3sc, inc) * 6 30
6.2sc, inc (4sc, inc) * 5 2sc 36
7. (5sc, inc) * 6 42
8.3sc, inc, (6sc, inc) * 5 3sc 48
9. (7sc, inc) * 6 54
10.4sc, inc, (8sc, inc) * 5, 4sc 60
11-19. One frequent needle for each loop 60
20. 16sc, (3sc, inc) * 7.16sc 67
21-26. One frequent needle for each loop 67
27. 16sc. (3sc, dec) * 7 16sc 60
28-29. One frequent needle for each loop 60
30.4sc, dec (8sc, dec) * 5,4sc 54
31. (7sc, dec) * 6 48
32.3sc, a (6sc, dec) * 5,3sc 42
33. (5sc, dec) * 6 36
34.2sc, a (4sc, dec) * 5,2sc 30
35. (3sc, dec) * 6 24
36. (4sc, dec) * 4 20
Note: Attach the 10 mm eye between the eye 19.20 so that the 8sc loop is visible.
I seal the eyes with the help of a lighter.
Toupee
1. 6sc with into magic ring
2.6inc 12
3. (sc, inc) * 6 18
4.sc, inc (2sc, inc) * 5, sc 24
5. (3sc, inc) * 6 30
6.2sc, inc (4sc, inc) * 5,2sc 36
7. (5sc, inc) * 6 42
8.3sc, inc (6sc, inc) * 5,3sc 48
9. (7sc, inc) * 6 54
10.4sc, inc, (8sc, inc) * 5.4sc 60
11-15 One needle per loop 60
16.ch, turn, 40sc, ch, turn
17.40sc, ch, turn
18.40sc, ch, turn
19.40sc
Note: We cut and fix a thread for hair up to 50 cm. We knit it, we connect it to both sides.
For kahkül, we cut 10 cm of rope and make bangs.
ARMS (2 pcs)
1. 6 with into magic ring
2.6inc 12
3.inc, 5sc, inc, 5sc 14
4.14sc 14
5. (2sc, inc) * 4.2sc 18
6-8 One needle per loop 18
9. (2sc, dec) * 4,2sc
10th dec, 12sc
11th dec, 11sc 12
12-39. One needle for each loop 12
LEG (2 pcs)
1. Pull out 9 ch. Starting from 2 chains; 8sc, inc, 6sc, inc 18
2.inc, 6sc, 3inc, 6sc, 2inc 24
3.sc, inc, 6sc (inc, sc) * 3,6sc, (inc, sc) * 2 30
Measure, cut and fit plastic for the sole of the foot.
(I cut the lid of the yoghurt container and put it away. If the toy will not be washed, you can cut the cardboard and leave it.)
4. Blo 30
5-7. (3 rows) One needle for each loop 30
8.5sc (dec, sc) * 6,7sc 24
9.5sc, 6dec, 7sc 18
Insert the wire and fill in fiber.
10.5sc, 3dec, 7sc 15
11-14. (4 rows) One sc for each loop 15
15. 1inc, 14sc 16
16.1sc, 1inc 14sc 17
17. One frequent needle for each loop 17
18. 2sc, 1inc, 14sc 18
19. One frequent needle for each loop 18
20.3sc, 1inc, 14sc 19
21. One frequent needle for each loop 19
22.4sc, 1inc, 14sc 20
23.One needle for each loop 20
24.5sc, 1inc, 14sc 21
25.One frequent needle for each loop 21
26.6sc, 1inc, 14sc 22
27.One needle per loop 22
28.6sc, 1inc, 15sc 23
29.One frequent needle for each loop 23
30.7sc, 1inc, 15sc 24
31.8sc, 1inc, 15sc 25
32.33.34.35 25
36.6sc, 6sl-st, 7sc, 5inc, 1sc 30
37-38. One frequent needle for each loop 30
39.19sc, 5dec, 1sc 25
40-53. (14 rows) One needle per loop 25
Knit 5sc from the left leg.
Cut the rope and hide it.
Note: Knit the right leg in the same way as 1-53. Combine with 19sc + 2 ch.
I start from the back to the trunk
BODY
1.25 sc, (2 sc, ch over) 25 sc (2 sc, ch over) insert marker
2. One frequent needle for each loop 54
3. (1sc, 1inc) * 2.9sc, 1inc, 24sc, 1inc, 9sc (1inc, 1sc) * 2.2sc 60
4-13. (10 rows) One needle per loop 60
14. (8sc, 1dec) * 6 54
15-17. One frequent needle for each loop 54
18. (7sc, 1dec) * 6 48
19-23. (6 rows) One needle per loop 48
24. (6sc, 1dec) * 6 42
25-29. (5 rows) One needle for each loop 42
30. (6sc, 1inc) * 6 48
31-35. (5 rows) One needle per loop 48
In this section we will join the arms
1.13sc, (6sc one with arm size), 18sc (6sc, one with arm size), 5sc
Move the pointer 4 sc forward and this will be your new mark location.
2.9sc, (arm 6 sc). 18sc. (6sc arm), 9sc
3-5. (3 rows) One needle per loop 48
6.2sc 1dec, (4sc1dec) * 7.2sc 40
7. (3sc1dec) * 6 32
8.1sc1dec (2sc1dec) * 7,1sc 24
9. (4sc1dec) * 4 20
10-13 (4 rows) One needle for each loop 20
Leave the rope long as we will join it with the head. Cut and fasten
Fix the head
DRESS
We start with 40 ch
1. Starting from the 10. Chain; 30 sc
2. (1sc, 1inc) * 15 45, Sl-st
3.45sc, Turn
4.45sc, Turn
5. BLO 6sc, 10Ch, (skip 8sc), 17sc, 10ch, (skip 8sc), 6sc, Ch, Turn
6.6sc, (over 10 sc ch), 17sc, (over 10 ch), 6sc, 10 ch buttonhole section 49
7.5sc, dec, (3sc, 1dec) * 2.15 sc, dec, (3sc, 1dec) * 2.6sc 43
8.33sc, Ch, Turn
9.43sc, Ch, Turn
10.43sc, Ch, Turn
11.43sc, Ch, Turn
12.44sc at the end of this row, join the sl-st to make a 10 ch buttonhole
13. As Flo Connect the two ends with Hdcinc, sl-st in each loop.
Body size
14. Each loop Hdcinc, sl-st, 2 ch
15-26. Hdc to every loop
27.Hold to each loop as Flo, sl-st, 2 ch
28.Hdc to each loop
29. Meanwhile join 2 sc (sc in same loop, 2 ch, sc) sl-st to the end of the row. Cut the thread.
We switched to the lower part of the skirt
With our GREEN thread
We continue from our 27th row. Let’s fix our green rope to the BLO part of the FLO section.
1. Hdcinc, Sl-st, 2 ch for each loop
2.Flo Hdc, Sl-st, Ch in each loop
3. Continue this row 2 sc (sc in the same loop, 2ch, sc) until the end of the row.
sl-st cut the rope.
We used our beige color
2. We continue our order with beige rope to the BLO part of the FLO part.
one . Hdcinc, Sl-st, 2 ch in each loop
2nd . Each loop Hdc, Sl-st, ch
3. The last row is 2 sc (1 sc 2 ch 1 sc in the same eye) sl-st cut the rope and hide it.
Finally, in our 5th place, we made flo
Let’s fix our red thread
1. Hdcinc to each loop
2. Hdc to each loop
3. 2sc (into the same loop, sc, 2ch, sc) let’s hide our rope at the end of the row
Note: Let’s sew our buttons and dress our baby without fixing the head.
Let’s fix our head after dressing
UNDERWEAR
1.80 ch sharpen both ends sl-st
2.4 ch into the same loop, skip 2 loops, (Hdc, 2ch, hdc same loop), skip 2 loops (hdc, 2ch, hdc) row
At the end of the row, we connect it with sl-st to the loop that we pulled 4 ch.
3.We went to the top row, pull 4 ch and pull the same loop, again the loops that we pulled chain, (hdc, 2ch, hdc)
we do it and proceed until the end of the row, in this way, we continue 8 rows.
4. Center the body and adjust the paca part, separate it in the middle with mutual sl-st and pull 4 chains.
We knit 3 rows and complete the leg part by turning. Knit the other leg part in the same way and finish.
5. We pull 120 chains and make laces for the size.
6.We pull 80 chains for Pacalar and make baguettes.
HAT
EAR (2 pcs)
1. 6 with into magic ring
2. (1sc1inc) * 3 9sc
3.One needle 9sc in each loop
4. (2sc1inc) * 3 12
5. (3sc1inc) * 3 15
6. (4sc1inc) * 3 18
7. (5sc1inc) * 3 21
8.One needle for each loop 21
9. (5sc1dec) * 3 18
10. (4sc1dec) * 3 15
11. (3sc1dec) * 3 12
12. (2sc1dec) * 3 9
Let’s combine the two ends and fold them with 4 sc and combine them with 2sc again.
Leave the rope long to sew. Cut and fasten.
HORN (2 pcs)
6sc with into magic ring
1-5. One frequent needle 6 sc in each loop
Let’s draw 6 ch. 6 sc into ch 2.
1-4. sc let’s go to the first horn
1 horn 6 sc 2. Horn 6 sc
1sc, 1dec, 2sc, 1dec, 2sc, 1dec, 1sc 9 sc
9 sc Let’s knit 4 rows
Come to the edge and each horn should be aligned!
Let’s draw 6 sc.Let’s knit 4 rows of 6 sc in 2 ch
Let’s switch to the trunk 9 sc trunk 6 sc horn 1sc, 1dec. Let’s finish our turn, it will be healthier if we wear a pointer until 10sc is left! Let’s knit 3 rows of 10 sc and leave the rope long and finish.
NOSE
1. 6 with into magic ring
2.6 inc 12
3. (1 sc, 1 inc) * 6 18
4. One frequent needle for each loop 18
5. One frequent needle for each loop 18
6. (1sc1dec) * 6 12
Leave the rope long to sew. Cut and fasten.
HAT
1. Pulling 2 ch into the magic ring 13 DC, Sl-st, 2z = 14 with chain
Dc end loop 1 DCINC, Sl-st, 2ch to the end of the 2nd row
In this way, increase 1 at the end of each row and knit the 17th row. Continue knitting until you have 30 HDC.
17. In this line, 1Dc, 1 Dcinc to the end of the row, Sl-st, 2ch
18. One Dc, Sl-st, 2ch in each loop
19. 2Dc, 1Dcinc Sl-st to end of row, 2ch
20. One Dc, Sl-st, 2ch in each loop
21. 3 Dc, 1Dcinc Sl-st to the end of the row, 2ch
22. One Dc, Sl-st, 2ch in each loop
23.4 DC, 1Dcinc Sl-st to end of row, 2ch
24.Dc, Sl-st, 2ch in each loop
25.5 DC 1 Dcinc, Sl-st to end of row, 2ch
26-29. One Dc, Sl-st, 2ch per loop
We start making tires on our 30th row. Let’s complete our rows with the Bp system in 4 rows by knitting a rear handrail from a front handrail with the BP system. Cut and hide our thread.
HAT JOINING DETAILS
HAT: Placement of ear, eye, nose.
NOSE: We have 29 rows for starting tires, so let’s fix our nose.
EYE: We attach and seal our 27 rows with 8 DC gaps.
EAR: 26. We fix our turn to both sides, counting from the edges of the eyes, 5 Dc spacing.
HORN: 24. In our turn, we are fixing it on the top of our eyes again.
Pompom the tip of our hat.
SHOE
SHOE SOLE (4 SC)
Pull out 1. 10 ch and start from 2. ch;
2 8sc (5sc to same loop) 7sc (3sc to same loop) marker.
3.1inc, 6sc, (hdc), (5hdcinc), (hdc), 5sc (4 inc)
4.9sc (inc, sc) * 5.14sc, sl-st
5.17hdc, (hdcinc), 17hdc, (3hdcinc) 42
Put plastic between the two bases, connect with sl-st and break the rope with a fixed fix.
Center the base and start!
SHOE UP SECTION
42 sc from all sl-st parts with beige color
1-4. (4 Row) One dense needle per loop 42
5.13sc (1dec, 1sc) * 6,11sc 36
6.13sc, 6dec, 11sc 30
7.12sc, (1dec, 1sc) * 3.9sc 27
8. 8sc, ch, turn
9. 16sc, ch, turn
10.16sc, ch, turn
11. 16sc, ch, turn
12.16sc, ch, turn
Turn around with sl-st or reverse frequent needle
SHOE
NOSE
1. Into magic ring il 6sc
2. 5inc
3.10sc
4.5dec
Leave the rope long to sew and fill in fiber as you sew.
EAR
1. 6sc with into magic ring
2. (1sc, inc) * 3
3. 9sc
4. (2sc, inc) * 3
5. (3sc, inc) * 3
6. (3sc, dec) * 3
7. (2sc, dec) * 3
8. (1sc, dec) * 3
Combine both ends with 2 sc. Leave the rope long to sew.
HORN
1.5sc with into magic ring
2-5. 5sc
6ch draw 2. Fill 5 sc in the eye, turn 3 rows and turn with the other horn
Merge one row turn all eyes (10sc)
(1sc, dec) = 5 sc
Leave 3 rows of 5 sc knit rope long
