Materials and Tools: 

White yarn for the body (e.g., yarn from Troitsk “Podmoskovnaya” 100g/250m) 

Yarn for mittens (e.g., yarn from Troitsk “Podmoskovnaya” 100g/250m, gray color) 

Yarn for the cylinder (e.g., Alize Cotton Gold, 100g/330m, black color) 

Yarn for the scarf (any woolen yarn) 

Yarn for the nose (carrot) (e.g., Alize Cotton Gold, 100g/330m, orange color) 

Buttons for sewing hands, 15 mm – 2 pieces 

Buttons and decorations for the cylinder 

3mm safety eyes 

2.5mm crochet hook 

Knitting needles for the scarf, 3.5mm 

Polyester stuffing 

Glass granulate 

Strong thread for sewing hands 

Pins 

Scissors 

Abbreviations: 

Crochet Hook: 

MR – magic ring 

Ch – chain 

Sl St – slip stitch 

Sc – single crochet 

Inc – increase 

Dec – decrease 

Instructions: 

Work in any order: hands, body, nose, and cylinder. Attach the nose and hands to the body. Decorate the cylinder and attach it to the head. 

PATTERN

Body and Head: 

The body and head are crocheted as one piece. It is recommended to crochet the bottom (rows 1-11) with a hook one size smaller to prevent it from curving. 

Row 1: 6 in MR (6) 

Row 2: 6 inc (12) 

Row 3: 1 sc, inc x 6 (18) 

Row 4: 2 sc, inc x 6 (24) 

Row 5: 3 sc, inc x 6 (30) 

Row 6: 4 sc, inc x 6 (36) 

Row 7: 5 sc, inc x 6 (42) 

Row 8: 6 sc, inc x 6 (48) 

Row 9: 7 sc, inc x 6 (54) 

Rows 10-16: 54 sc (7 rows) 

Row 17: 7 sc, dec x 6 (48) 

Rows 18-20: 48 sc (3 rows) 

Row 21: 6 sc, dec x 6 (42) 

Rows 22-24: 42 sc (3 rows) 

Row 25: 5 sc, dec x 6 (36) 

Rows 26-28: 36 sc 

Row 29: 4 sc, dec x 6 (30) 

Rows 30-32: 30 sc 

Row 33: 3 sc, dec x 6 (24) 

Rows 34-37: 24 sc 

Row 38: 2 sc, dec x 6 (18) 

Row 39: 18 sc 

Row 40: 18 inc (36) 

Rows 41-47: 36 sc 

Row 48: 4 sc, dec x 6 (30) 

Row 49: 3 sc, dec x 6 (24) 

Row 50: 2 sc, dec x 6 (18) 

Row 51: 1 sc, dec x 6 (12) 

Row 52: 6 dec (6) 

Cut the yarn, fasten off, and hide the remaining loops. 

Hands: 

Crochet with red yarn: 

Row 1: 6 in MR (6) 

Row 2: 6 inc (12) 

Row 3: 3 sc, inc x 3 (15) 

Row 4: 15 sc 

Row 5: 7 sc, 1 puff stitch, 7 sc (15) 

Row 6: 15 sc 

Row 7: 3 sc, dec x 3 (12) 

Rows 8-9: 12 sc 

Switch to gray yarn without cutting the red yarn, which will be used to make the mitten cuffs. 

Rows 10-19: 12 sc (10 rows) 

In the 10th row, use gray yarn for the back loops and make 12 sc. Stuff the hand in the 19th row. 

Row 20: 6 dec (6). 

Return to the 10th row, and crochet with red yarn through the front loops, making 12 sc. Cut the red yarn and hide it inside the hand. 

Cut the gray yarn, thread the remaining loops onto a needle, tighten, secure, and hide. 

Make the second hand following the same instructions. 

Nose: 

Row 1: 5 in MR (5) 

Rows 2-4: 5 sc (3 rows) 

Stuff the nose tightly. Cut the yarn, leaving a long tail for sewing. 

Cylinder: 

Row 1: 6 in MR (6) 

Row 2: 6 inc (12) 

Row 3: 12 inc (24) 

Row 4: 3 sc, inc x 6 (30) 

Row 5: 30 sc in the back loops only 

Rows 6-14: 30 sc (9 rows) 

Row 15: 30 sc in the front loops only 

Row 16: 30 sc 

Row 17: 30 sl st 

The last row reinforces the edge of the cylinder. 

Scarf: 

Using 3.5mm knitting needles, cast on 10 stitches and knit in ribbing pattern: 1 knit, 1 purl. Don’t forget to slip the first stitch knitwise and purl the last stitch. These are the edge stitches. 

Row 1: Edge, 1 knit, 1 purl (repeat to the end of the row), purl the last stitch. 

Row 2: Edge, continue knitting the pattern, purl the last stitch. 

Repeat these two rows for a total of 74 rows. 

In the 75th row, bind off the stitches according to the pattern. 

Sew the scarf into a loop, making it into a cowl. Seam the beginning of the scarf to the end. 

Assembly: 

Sew the nose to the head. 

Attach the safety eyes. 

Sew on the hands. Mark the attachment points for the hands along the body edges with pins. 

Sew buttons for the hands. 

Attach buttons to the snowman’s body. Before doing this, put the scarf on the body and mark the button attachment points. 

Decorate the cylinder with any desired decorations. You can use buttons of various sizes and colors, add beads, wooden figurines, artificial flowers, berries, etc. 

Decorate the cylinder, put it on the head, and sew it in place. 

ABBREVIATIONS

Sc = single crochet

Hdc = Half double crochet

Ch = chains

Inc = Increases

Dec = Decreases

Sl-st = Slip stitch

Skeleton Jack 

Head: 

White 

1.8 sc into magic ring (8) 

2.8 inc (16) 

3. (sc; inc) * 8 (24) 

4. (2 sc; inc) * 8 (32) 

5. (3 sc; inc) * 8 (40) 

6. (4 sc; inc) * 8 (48) 

7.48 sc (48) 

8. (7 sc; inc) * 6 (54) 

9. (8 sc; inc) * 8 (60) 

10-19. 60 sc (60) 

20. (9 sc; inc) * 6 (66) 

21.66 sc (66) 

22.15 sc; 3 inc ;; 30 sc; 3 sc; 15 sc (72) 

23.72 sc (72) 

24. (10 sc; dec) * 6 (66) 

25. (3 sc; dec) * 12; 6 sc (54) 

26. (7 sc; dec) * 6 (48) 

27. (6 sc; dec) * 6 (42) 

28. (5 sc; dec) * 6 (36) 

29. (4 sc; dec) * 6 (30) 

Cut the thread, leave the thread for sewing. 

Insert the eyes at a distance of 11 loops between 17-18 rows. Embroider the mouth and nose as shown in the photo. 

Legs (2 pcs.): 

Black color 

1. into magic ring 8 sc (8) 

2.8 inc (16) 

3. (3 sc; inc) * 4 (20) 

4.20 sc (20) 

5. (2 sc; dec) * 5 (15) 

6.15 sc (15) 

7. White (2 sc; inc) * 4 (20) 

8.20 sc (20) 

9. Black color 20 sc (20) 

Cut the thread on the first leg. Tie the second one without cutting the thread. 

Connect the first to the second with 2 ch. 

10.20 sc in first leg, 2 sc in ch, 20 sc in second leg, 2 sc in ch (44) 

11.White (10 sc; inc) * 4 (48) 

12.48 sc (48) 

13-14. Black 48 sc (48) 

15-16. White 48 sc (48) 

17. Black 48 sc (48) 

18. (6 sc; dec) * 6 (42) 

19-20. White 42 sc (42) 

21-22. Black 42 sc (42) 

23-24. White 42 sc (42) 

25. In black (5 sc; dec) * 6 (36) 

26.36 sc (36) 

27. In white (4 sc; dec) * 6 (30) 

28.30 sc (30) 

Cut the thread. Fill. Sew the head to the body. 

Hands (2 pcs.): 

White 

1.8 sc into magic ring (8) 

2.8 inc (16) 

3-5. 16 sc (16) 

6-7. Black 16 sc (16) 

8-9. White 16 sc (16) 

10.Black color 16 sc (16) 

11. (2 sc; dec) * 3, 4 sc (13) 

12-13. White 13 sc (13) 

Hat: 

Black color 

1.6 sc into magic ring (6) 

2.6inc (12) 

3. (1 sc; inc) * 6 (18) 

4. (2 sc; inc) * 6 (24) 

5. (3 sc; inc) * 6 (30) 

6. (4 sc; inc) * 6 (36) 

7. (5 sc; inc) * 6 (42) 

8. (6 sc; inc) * 6 (48) 

9. (7 sc; inc) * 6 (54) 

10. For the back half loop 54 sc (54) 

11-14. 54 sc (54) 

15. (7 sc; dec) * 6 (48) 

16-17. 48 sc (48) 

18. (6 sc; dec) * 6 (42) 

19.42 sc (42) 

20-22. White 42 sc (42) 

23.Black for the front half loop (6 sc; inc) * 6 (48) 

24.48 sc (48) 

25. (7 sc; inc) * 6 (56) 

26.56 sc (56) 

Cut the thread, hide. Embroider the cut. 

Congratulations! The work is ready. 

Supplies

1mm Crochet Hook (You will use this hook to create the flower and stem only)

1.5mm Crochet Hook (You will use this hook to create the Suspenders and Bow Tie)

2.75mm Crochet Hook

Worsted Weight Yarn in Red, Off White, Green, Yellow, Orange and Brown

Crochet Thread in White, Green, Brown, Black and Red

Stuffing

7.5mm Safety Eyes

Scissors

Needle

Stitch Markers

Wire Brush

Abbreviations

Ch-Chain

Sc-Single Crochet

Inc-Increase

Dec-Decrease

Hdc-Half Double Crochet

Fo-Fasten Off

Finished Size

12 inches from the top of his hat to his shoes

Head and Body

Rd1: Starting at the top of your dolls head with off white yarn do 6sc in a ring (6)

Rd2: Inc  x 6 (12)

Rd3: Inc x 12 (24)

Rd4: [Sc, inc] x 12 (36)

Rd5-9: Sc x 36 (36)

Rd10: [Sc x 4, inc] x 7, sc (43)

Rd11-12: Sc x 43 (43)

Rd13: You will be marking where you will be placing the eyes in this round. Sc x 17, place a stitch marker in the last stitch, sc x 6, place a stitch marker in the last stitch, sc x 20 (43)

Rd14-16: Sc x 43 (43)

Rd17: [Sc x 6, dec] x 5, sc x 3 (38)

Rd18: Sc x 38 (38)

Rd19: [Sc x 4, dec] x 6, sc x 2, now insert your eyes where you placed the stitch markers between Rd13 and Rd14 (32)

Rd20: Dec x 16 (16)

Rd21: Dec x 8 (8)

Rd22: Change to green and inc x 8 (16)

Rd23: [Sc x 2, inc] x 5, sc (21)

Rd24: [Sc x 4, inc] x 4, sc (25)

Rd25-26: Sc x 25 (25)

Rd27: [Sc x 3, inc] x 6, sc (31)

Rd28: Sc x 31 (31)

Rd29: Sc x 12, inc x 3, sc x 10, inc x 3, sc x 3 (37)

Rd30-31: Sc x 37 (37)

Rd32: Sc x 4, switch to yellow and sc x 33 (37)

Rd33-37: Sc x 37 (37)

Rd38: Sc x 12, dec x 4, sc x 9, dec x 4 (29)

Rd39: You will now be starting the first leg. Sc x 6, skip 15 stitches, sc x 8 (14)

Rd40: Sc x 12, dec (13)

Rd41: Sc x 13 (13)

Rd42: Dec, sc x 11 (12)

Rd43: Sc x 12 (12)

Rd44: Dec, Sc x 10 (11)

Rd45: Sc x 11 (11)

Rd46: Dec, sc x 9 (10)

Rd47-49: Sc x 10 (10)

Rd50: Sc in front loop x 10 (10)

Rd51: [Sc, inc] x 5, fo (15)

Second Leg

Rd1: With the back of your doll facing you insert your hook into the first stitch to the left of your first leg and with yellow yarn sc, sc x 4, dec, sc x 8 (14)

Rd2: Jump back over to the first stitch and sc x 6, dec, sc x 6 (13)

Rd3: Sc x 13 (13)

Rd4: Sc x 6, dec, sc x 5 (12)

Rd5: Sc x 12 (12)

Rd6: Sc x 6, dec, sc x 4 (11)

Rd7: Sc x 11 (11)

Rd8: Sc x 6, dec, sc x 3 (10)

Rd9-11: Sc x 10 (10)

Rd12: Sc in front loop x 10 (10)

Rd13: [Sc, inc] x 5, fo (15)

Arm (Make 2)

Rd1: With off white yarn sc x 6 in a ring (6)

Rd2-7: Sc x 6 (6)

Rd8: Change to green and sc x 6 (6)

Rd9-10: Sc x 6, fo at the end of Rd10 (6)

Nose

Rd1: With red yarn do 5sc in a ring (5)

Rd2: Inc, sc x 4 (6)

Rd3-4: Sc x 6 (6)

Rd5: Dec x 3, fo (3)

Shoe (Make 2)

Rd1: With red yarn ch 9, join (9)

Rd2-3: Sc x 9 (9)

Row4: Turn, sc x 3 (3)

Row5: Turn, ch, inc, sc, inc (5)

Row6: Turn, ch, inc, sc x 3, inc (7)

Row7: Turn, ch, sc x 7, place a stitch marker in the last stitch of this round (7)

Rd8: Sc around the entire piece to the stitch before the stitch marker x 23 (23)

Rd9-10: Sc x 24, fo at the end of Rd10 (24)

Sole of Shoe (Make 2)

Row1: With red yarn ch 7 (7)

Row2: Turn, sc x 6 (6)

Row3: Turn, ch, sc x 6 (6)

Row4: Turn, chain, dec, sc x 2, dec (4)

Row5-7: Turn, ch, sc x 4 (4)

Row8: Turn, ch, sc, dec, sc, fo (3)

Hat

Rd1: With orange yarn do 6 sc in a ring (6)

Rd2: Inc x 6 (12)

Rd3: [Sc, inc] x 6 (18)

Rd4: [Sc x 2, inc] x 6 (24)

Rd5: Sc in front loop x 24 (24)

Rd6-9: Sc x 24 (24)

Rd10: [Sc x 4, dec] x 4 (20)

Rd11-12: Sc x 20 (20)

Rd13: [Sc x 2, dec] x 5 (15)

Rd14: Inc in front loop of next st x 15 (30)

Rd15: Sc x 30 (30)

Rd16: [Sc, inc] x 15, fo (45)

Band On The Hat

Row1: With brown yarn ch 25 (25)

Row2: Turn, sc x 24 , fo (24)

Flower

Row1: With white embroidery thread and a 1mm hook ch 16 (16)

Row2: Turn, [hdc x 4 in next stitch, sc] x 7, sc, fo (36)

Stem

Rd1: With green embroidery thread and a 1mm hook do 5sc in a ring (5)

Rd2-5: Sc x 5, fo at the end of Rd5 (5)

Leaf

Row1: With green embroidery thread and a 1mm hook ch 4 (4)

Row2: Turn, sc x 3 (4)

Row3: Turn, ch, sc x 3 (3)

Row4: Turn, ch, dec, sc (2)

Row5: Turn, ch, dec (1)

Rd6: Now sc around the entire piece, fo

Suspenders (Make 2)

Row1: With green embroidery thread and a 1.5mm hook ch36 (36)

Row2: Turn, sc x 35 (35)

Row3: Turn, change to red, ch, sc x 35 (35)

Row4: Turn, change to brown, ch, sc x 35, fo (35)

Bow Tie

Row1: With brown crochet thread and a 1.5mm hook ch 12 (12)

Row2: Turn, sc x 11 (11)

Row3-7: Turn, ch, sc x 11 (11)

Rd8: Now hdc around the entire piece, fo

Belt

Row1: With brown embroidery thread and a 1.5mm hook ch 60 (60)

Row2: Turn, hdc x 59, fo (59)

Hair

To make the hair cut long strips of red yarn. Then count 7 rounds down from the top of your dolls head. Add hair in this round with the loop method. Contniue this method for five more rounds down. Then use your wire brush and brush out all of the hair, then trim it.

Balloon

Rd1: With blue yarn do 6 sc in a ring (6)

Rd2: Inc x 6 (12)

Rd3: Sc x 12 (12)

Rd4: [Sc, inc] x 6 (18)

Rd5-9: Sc x 18 (18)

Rd10: [Sc, dec] x 6 (12)

Rd11: Dec x 6, stuff balloon firmly(6)

Rd12: Sc in back loop x 6 (6)

Rd13: Dec x 3, fo weave in end (3)

Trim On The Balloon

Rd1: With blue yarn insert hook into any one of the front loops of Rd12 and inc x 6, fo and weave in your end  (12)

Assembly

Sew the soles onto your shoes, stuff your doll and shoes firmly. Sew the shoes onto your doll, you sew them onto the back loops of the second last round of each leg. I made the shoes separate, so I could decide later on once my doll was finished exactly where I wanted the shoes to be placed. Sew the arms and nose onto your doll. Sew on the suspenders and belt. Embroider little tiny dots onto your bow tie. Then take a long piece of yarn and tie a knot with the long yarn in the middle of the bowtie, and sew the tie in place. Sew the band onto the hat. Sew the flower and leaf onto the stem, and sew the flower onto the hat. Stuff the hat and sew it onto your doll. Embroider on eyebrows and a mouth. Weave in all ends and trim them. Then cut a piece of craft wire and bend the one end, then insert the bent end into the bottom of your balloon

Yarn:

1. Pekhorka “Children’s novelty”, composition: 100% acrylic

high-volume, 200m / 50gr, color: 02- black, 12- yolk, 33-

golden olive, 79- calendula, 187- cappuccino, 742- billiards,

2. Troitskaya “Baby”, composition: 20% wool and 80% acrylic,

135m / 50gr color 1290 – golden (for knitting a chest)

Hook No. 1.4

Note: For knitting decor, you can use the rest of the yarn,

which you have

We also need:

Filling: synthetic winterizer, holofiber, etc.

Wire diameter 1.5mm

Hot melt gun

PVA glue

A piece of plastic or thick cardboard

A piece of plastic water pipe with a diameter of 9cm

A piece of flexible metal (can be replaced with thick cardboard, but

cardboard will lack in a part of the even bend of the wing)

A piece of wooden cutting or branch with a diameter of 2.5-3 cm (you can

replace with foam)

Skewers of different thicknesses

Pearl color beads 3 pcs. diameter 1 cm

Screwdriver

Drills for 2 and 3 mm

Nippers (these are pliers with a cutting working surface,

used for cutting wires, nails, etc.)

Scissors

Metal scissors

Hacksaw for metal

Needle

Decorative small lock

Balloon

Finished carriage height ≈ 23 cm, width 30 cm

Abbrevations:

sc – single crochet

dc – half-column

hdc – half double crochet

d2c – double crochet

d4c – column with four crochets

hd2c – double crochet half-column

sl-st – connecting post

inc – 2 single crochet in one loop

dec – 2 single crochets, knitted together

ch – air loop

ch – lifting loop (also lifting loop can be denoted as ch –

air loop, both at the beginning of the row and at the end)

= (equal sign) – indicates the total number of loops in a row

Pumpkin

Yarn: Pekhorka “Children’s novelty”, color – yolk and calendula

Two pieces of calendula color and two pieces of yolk color.

Please watch the video for pattern explanations.

Trailer Video:

Dense wall.

We knit in rotary rows.

1st row: 4 ch

2nd row: starting from the 2nd loop from the hook, knit inc, sc, inc = 5 sc

3rd row: ch, 5sc

4th row: ch, inc, 3 sc, inc = 7 sc

5 row: ch, 7 sc

6 row: ch, inc, 5 sc, inc = 9 sc

7 row: ch, 9 sc

8 row: ch, inc, 7 sc, inc = 11 sc

9 row: ch, 11 sc

10 row: ch, inc, 9 sc, inc = 13 sc

11 row: ch, 13 sc

12th row: ch, inc, 11 sc, inc = 15 sc

13 row: ch, 15 sc

Row 14: ch, inc, 13 sc, inc = 17 sc

15 row: ch, 17 sc

16 row: ch, inc, 15 sc, inc = 19 sc

17 row: ch, 19 sc

Row 18: ch, inc, 17 sc, inc = 21 sc

19 row: ch, 21 sc

20th row: ch, inc, 19 sc, inc = 23 sc

21 row: ch, 23 sc

22 row: ch, inc, 21 sc, inc = 25sc

23 row: ch, 25 sc

24 row: ch, inc, 23 sc, inc = 27 sc

25 row: ch, 27 sc

26 row: ch, inc, 25 sc, inc = 29 sc

27 row: ch, 29 sc

27 row: ch, inc, 27 sc, inc = 31 sc

Rows 28-33: 31 sc

34 row: ch, dec, 27 sc, dec = 29 sc

35 row: ch, 29 sc

36 row: ch, dec, 25sc, dec = 27 sc

37 row: ch, 27 sc

38 row: ch, dec, 23sc, dec = 25sc

Row 39: ch, 25sc

40 row: ch, dec, 21sc, dec = 23sc

Row 41: ch, 23sc

42 row: ch, dec, 19sc, dec = 21sc

Row 43: ch, 21sc

44 row: ch, dec, 17sc, dec = 19sc

45 row: ch, 19sc

46 row: ch, dec, 15sc, dec = 17sc

47 row: ch, 17sc

48 row: ch, dec, 13sc, dec = 15sc

Row 49: ch, 15sc

50 row: ch, dec, 11sc, dec = 13sc

Row 51: ch, 13sc

52 row: ch, dec, 9sc, dec = 11sc

Row 53: ch, 11sc

54 row: ch, dec, 7sc, dec = 9sc

55 row: ch, 9sc

56 row: ch, dec, 5sc, dec = 7sc

Row 57: ch, 7sc

58 row: ch, dec, 3sc, dec = 5sc

Row 59: ch, 5sc

60 row: ch, dec, sc, dec

Fasten knitting, cut the working thread and hide the end of the thread in the product.

Carriage door

One calendula detail and one yolk detail.

We knit in rotary rows.

1st row: 4 ch

2nd row: starting from the 2nd loop from the hook, knit inc, sc, inc = 5 sc

3rd row: ch, 5sc

4th row: ch, inc, 3 sc, inc = 7 sc

5 row: ch, 7 sc

6 row: ch, inc, 5 sc, inc = 9 sc

7 row: ch, 9 sc

8 row: ch, inc, 7 sc, inc = 11 sc

9 row: ch, 11 sc

10 row: ch, inc, 9 sc, inc = 13 sc

11 row: ch, 13 sc

12th row: ch, inc, 11 sc, inc = 15 sc

13 row: ch, 15 sc

Row 14: ch, inc, 13 sc, inc = 17 sc

15 row: ch, 17 sc

16 row: ch, inc, 15 sc, inc = 19 sc

17 row: ch, 19 sc

Row 18: ch, inc, 3sc = 5sc, turn knitting

Row 19: ch, 5sc

20 row: ch, inc, 2sc, dec = 5sc

Row 21: ch, 5sc

22 row: ch, inc, 4sc = 6sc

23 row: ch, 6sc

24th row: ch, inc, 3sc, dec = 6sc

25 row: ch, 6sc

26th row: ch, inc, 3sc, dec = 6sc

27 – 35 rows: ch, 6sc

36 row: ch, dec, 3sc, inc = 6sc

37 row: ch, 6sc

38 row: ch, dec, 3sc, inc = 6sc

Row 39: ch, 6sc

40 row: ch, dec, 3sc, inc = 6sc

41 row: ch, 6sc

We do not cut the working thread!

We turn to knitting the second wall. We count 10 loops from the connected wall, join in the 11th and from the 12th loop we knit the 18th row.

18th row: ch, 3sc, inc = 5sc

Row 19: ch, 5sc

20 row: ch, dec, 2sc, inc = 5sc

Row 21: ch, 5sc

22 row: ch, 4sc, inc = 6sc

23 row: ch, 6sc

24 row: ch, dec, 3sc, inc = 6sc

25 row: ch, 6sc

26th row: ch, dec, 3sc, inc = 6sc

27 – 35 rows: ch, 6sc

36 row: ch, inc, 3sc, dec = 6sc

37 row: ch, 6sc

38 row: ch, inc, 3sc, dec = 6sc

Row 39: ch, 6sc

40 row: ch, inc, 3sc, dec = 6sc

41 row: ch, 6sc

Fasten knitting, cut the working thread and hide the tip of the thread in the product.

We connect both walls.

42 row: ch, dec, 3sc, inc, 9ch (join the other wall) inc, 3sc, dec = 21sc

43 row: ch, 21sc (ie: 6sc along one wall + 9sc along a chain of ch + 6sc along the other wall)

44 row: ch, dec, 17sc, dec = 19sc

45 row: ch, 19sc

46 row: ch, dec, 15sc, dec = 17sc

47 row: ch, 17sc

48 row: ch, dec, 13sc, dec = 15sc

Row 49: ch, 15sc

50 row: ch, dec, 11sc, dec = 13sc

Row 51: ch, 13sc

52 row: ch, dec, 9sc, dec = 11sc

Row 53: ch, 11sc

54 row: ch, dec, 7sc, dec = 9sc

55 row: ch, 9sc

56 row: ch, dec, 5sc, dec = 7sc

Row 57: ch, 7sc

58 row: ch, dec, 3sc, dec = 5sc

Row 59: ch, 5sc

60 row: ch, dec, sc, dec

Fasten knitting, cut the working thread and hide the end of the thread in the product.

Window

Three pieces of calendula color and three pieces of yolk color.

We knit in rotary rows.

1st row: 4 ch

2nd row: starting from the 2nd loop from the hook, knit inc, sc, inc = 5 sc

3rd row: ch, 5sc

4th row: ch, inc, 3 sc, inc = 7 sc

5 row: ch, 7 sc

6 row: ch, inc, 5 sc, inc = 9 sc

7 row: ch, 9 sc

8 row: ch, inc, 7 sc, inc = 11 sc

9 row: ch, 11 sc

10 row: ch, inc, 9 sc, inc = 13 sc

11 row: ch, 13 sc

12th row: ch, inc, 11 sc, inc = 15 sc

13 row: ch, 15 sc

Row 14: ch, inc, 13 sc, inc = 17 sc

15 row: ch, 17 sc

16 row: ch, inc, 15 sc, inc = 19 sc

17 row: ch, 19 sc

Row 18: ch, inc, 17 sc, inc = 21 sc

19 row: ch, 21 sc

20th row: ch, inc, 19 sc, inc = 23 sc

21 row: ch, 23 sc

22 row: ch, inc, 21 sc, inc = 25sc

23 row: ch, 25 sc

24 row: ch, inc, 23 sc, inc = 27 sc

25 row: ch, 27 sc

26 row: ch, 6sc, turn knitting

27 row: ch, dec, 3sc, inc = 6sc

28 row: ch, 6sc

Row 29: ch, dec, 3sc, inc = 6sc

30 – 34 rows: ch, 6sc

35 row: ch, inc, 3sc, dec = 6sc

Row 36: ch, 6sc

37 row: ch, inc, 3sc, dec = 6sc

38 row: ch, 6sc

Row 39: ch, inc, 3sc, dec = 6sc

40 row: ch, 6sc

41 row: ch, inc, 3sc, dec = 6sc

We do not cut the working thread!

We turn to knitting the second wall. We count 14 loops from the connected wall, join in the 15th and from the 16th loop we knit the 26th row.

26 row: 6sc

27 row: ch, inc, 3sc, dec = 6sc

28 row: ch, 6sc

Row 29: ch, inc, 3sc, dec = 6sc

30 – 34 rows: ch, 6sc

35 row: ch, dec, 3sc, inc = 6sc

Row 36: ch, 6sc

37 row: ch, dec, 3sc, inc = 6sc

38 row: ch, 6sc

Row 39: ch, dec, 3sc, inc = 6sc

40 row: ch, 6sc

41 row: ch, dec, 3sc, inc = 6sc

Fasten knitting, cut the working thread and hide the end of the thread in the product.

We knit with a thread from the first wall:

42 row: ch, 6sc, 9ch (join the other wall) 6 sc = 21sc

43 row: ch, 21sc (ie: 6sc along one wall + 9sc along a chain of ch + 6sc along the other wall)

44 row: ch, dec, 17sc, dec = 19sc

45 row: ch, 19sc

46 row: ch, dec, 15sc, dec = 17sc

47 row: ch, 17sc

48 row: ch, dec, 13sc, dec = 15sc

Row 49: ch, 15sc

50 row: ch, dec, 11sc, dec = 13sc

Row 51: ch, 13sc

52 row: ch, dec, 9sc, dec = 11sc

Row 53: ch, 11sc

54 row: ch, dec, 7sc, dec = 9sc

55 row: ch, 9sc

56 row: ch, dec, 5sc, dec = 7sc

Row 57: ch, 7sc

58 row: ch, dec, 3sc, dec = 5sc

Row 59: ch, 5sc

60 row: ch, dec, sc, dec

Fasten knitting, cut the working thread and hide the tip of the thread in the product.

Sew the parts with a simple seam over the edge separately 6 pieces in yellow and separately 6 pieces in orange.

When stitching, we alternate: window, solid wall, window, solid wall, window, door.

Insert the resulting yellow part inside the orange part, with the seams inside (seam to seam).

Tie the armholes of the windows and doors sc, and then a crustacean step

Sew the remaining seams. First on the yellow part, and then on the orange one.

In a container with warm water, dilute the PVA glue, moisten the resulting part of the carriage base completely. Remove from the container, wait until the water drains (do not squeeze), insert a balloon inside and inflate it, straighten the product. This way we will give the shape. Leave the product in this form until completely dry, then pierce the ball.

Pumpkin top plug

Yarn: Pekhorka “Children’s novelty”, color – yolk

1st row: 6 sc in amigurumi ring

2nd row: (inc) – 6 times = 12 sc

3rd row: (sc, inc) – 6 times = 18 sc

4th row: (2 sc, inc) – 6 times = 24 sc

Tie with a crustacean step. Fasten knitting, cut the working thread and hide the end of the thread in the product.

Apply glue to the wrong side of the part and glue the pumpkin from the inside to the top, so we decorate the hole.

Bottom for pumpkin

Yarn: Pekhorka “Children’s novelty”, color – yolk

1st row: 6 sc in amigurumi ring

2nd row: (inc) – 6 times = 12 sc

3rd row: (sc, inc) – 6 times = 18 sc

4th row: (2 sc, inc) – 6 times = 24 sc

5 row: (3 sc, inc) – 6 times = 30 sc

6 row: (4 sc, inc) – 6 times = 36 sc

7 row: (5 sc, inc) – 6 times = 42 sc

8 row: (6 sc, inc) – 6 times = 48 sc

9th row: (7 sc, inc) – 6 times = 54 sc

10 row: (8 sc, inc) – 6 times = 60 sc

11 row: (9 sc, inc) – 6 times = 66 sc

12th row: (10 sc, inc) – 6 times = 72 sc

Row 13: (11 sc, inc) – 6 times = 78 sc

Row 14: (12 sc, inc) – 6 times = 84 sc

Tie with a crustacean step. Fasten knitting, cut the working thread and hide the end of the thread in the product.

Cut a circle with a diameter of ≈ 5 mm smaller than the connected circle from plastic or thick cardboard. Apply a small amount of glue to one side of the cut out circle and glue the knitted bottom for the pumpkin.

Apply glue from the wrong side of the bottom and glue to the bottom of the pumpkin.

Pumpkin tail

Yarn: Pekhorka “Children’s novelty”, color – billiards

1st row: 24ch in a circle

2nd row: 24sc

3rd row: (2sc, dec) – 6p = 18sc

4th row: 18sc

5 row: (sc, dec) – 6p = 12sc

6 row: 12sc

Then we knit in a circle: 40sc, dec, 5sc, dec, 5sc, dec, 10sc, dec, 10sc, dec, 10sc, dec.

Fasten knitting. Cut the working thread according to the length required to wrap the wire end.

Insert a wire into the product so that its tip with a length of ≈ 15 cm sticks out of the product, wrap the tip with the remaining working thread, fix the end of the thread with glue. Wind the wire around the pencil, making it look like a spiral. Bend the other end of the wire into a loop so that it does not jump out of the product. Fill the product with padding polyester.

Glue the ponytail to the top of the pumpkin

“Eyelet” for the frame

Yarn: Pekhorka “Children’s novelty”, color – golden olive It will be necessary to knit 4 such “ears”, 2 for each knitted frame detail.

1st row: 4ch

2nd row: inc, sc, ch

3rd row: inc, 3sc, inc, ch

4th row: 2sc, 3ch, skip 3 loops and starting from 4th knit 2sc, ch

5 row: 7sc

Fasten knitting, cut and hide the working thread.

Frame (base for the carriage)

Yarn: Pekhorka “Children’s novelty”, color – golden olive

It is necessary to knit 2 identical parts.

We knit in reverse rows, do not forget to knit a lifting loop at the end of each row, further in the description it is given only in difficult moments and is indicated by (+ ch).

1 row: 91ch starting from the 2nd loop from the hook, knit 90sc

Row 2 – Row 9: 90sc

Fasten knitting, cut off the working thread.

10 row: retreat 30 loops; starting from the 31st loop we attach the working thread and knit 30sc

11-14 rows: 30sc, ch

14th row: 10ch, attach the “eyelet”, knitting 7sc, 10ch (+ ch)

15 row: 57sc, 10ch, attach the “eyelet”, knitting 7sc, 10ch (+ ch)

16 row: 84sc, ch (+ ch)

17th row: 85sc, ch (+ ch)

Rows 18 – 47: 86sc

48 row: dec, 84sc = 85sc

49 row: dec, 83sc = 84sc

50 row: 17sc (+ ch),

we turn knitting, we will knit an “ear”:

1st row: 2sc, 3ch, skip 3 loops and starting from 4th loop we knit 2sc (+ ch)

2nd row: dec, 3sc, dec

3rd row: dec, sc, dec

Fasten knitting, cut and hide the working thread.

50 row: attach the working thread to the 18th loop of the frame (near the “ear”),

57sc (+ ch), we turn knitting, we will knit the second “ear”:

1st row: 2sc, 3ch, skip 3 loops and starting from 4th loop we knit 2sc (+ ch)

2nd row: dec, 3sc, dec

3rd row: dec, sc, dec

Fasten knitting, cut the working thread.

Row 50: attach a working thread near the base of the “ear” and knit 10sc for a row.

51 row: counting from the edgeproducts 27 loops, attach the working

thread in the 28th loop and knit 30sc

Rows 52 – 55: 30sc

Without breaking the thread, we type 30ch (+ ch)

56 row: 60sc, 30ch (+ ch)

Rows 57 – 64: 90sc

Cut the frame out of flexible metal or thick cardboard. Thick cardboard will have the disadvantage of having the fenders fold evenly over the wheels, so it’s better to find flexible metal. I used leftovers from the ebb when installing the window.

I attached a knitted frame, leveled it and circled it with a marker. Carved with scissors for metal. It was very difficult, but I managed it  Attention! the frame should be slightly smaller in volume than knitted parts.

Here’s what you should get

Now we assemble the frame. It is necessary to combine these parts into one.

To do this, we connect both knitted frame parts, insert a frame between them and tie around the edges sc, and then with a crustacean step.

Wheels

Yarn: Pekhorka “Children’s novelty”, color – black, cappuccino

(hereinafter I refer to it as brown)

“Tire” and “rim”

4 parts each

We collect 76ch from brown yarn, close it in a ring, then knit in a circle 76 sc 4 ​​rows. Fasten knitting, cut the working thread.

Black yarn will also need to knit 4 parts, but we do not cut the working thread. Cast on 76ch, close into a ring, then knit 76 sc 5 rows in a circle.

We connect the brown and black pieces by knitting along the edge sc, passing the hook through both pieces like a loop into a loop. Details should be placed seamy sides to each other. Fasten knitting, cut and hide the working thread.

To assemble the wheels, you need to prepare individual parts. For this we need a plastic pipe (I used the remains of a new plastic water pipe) with a diameter of 90 mm.

Mark 4 pieces 1 cm wide. I sawed off with a hacksaw for metal. Here’s what happened. In each ring you need to make holes for the needles as shown in the photo. To do this, it is necessary to apply a marking for 8 knitting needles, placing them at an equal distance from each other. Then I used male help, since I needed a screwdriver and a drill with a diameter of 2 mm. Drilling 8 holes

We also need a base for the wheel disc. For this I used an old rake handle, having cut 4 “tablets”

1 cm wide and ≈ 2.5 cm in diameter.

Next, we apply the markings for cutting out the holes for the knitting needles.

We drill 8 holes with a 2mm drill, and in the center we cut a through central axial hole with a 3mm drill as shown in photo 39.

We take a thin skewer and try it on, cut the knitting needles of the required length.

These are the skewers I used, I bought them in the Fix Price chain store. Thin for the spokes (you can use toothpicks here), and thick for connecting a pair of wheels.

We pull the knitted product of the wheel onto the plastic base, insert the skewers, as shown in the photo. I did not attach the skewers to glue, I just inserted

We connect the brown and black knitted parts, knitting with black yarn along the edge sc, threading the hook through both parts according to the loop-to-loop principle. Fasten knitting, cut and hide the working thread. Wrap the knitting needles with brown yarn.

We knit disks on the wheel.

8 pieces

1st row: 6 sc in amigurumi ring

2nd row: (inc) – 6 times = 12 sc

3rd row: (sc, inc) – 6 times = 18 sc

4th row: (2 sc, inc) – 6 times = 24 sc

5 row: (3 sc, inc) – 6 times = 30 sc

6 row: (4 sc, inc) – 6 times = 36 sc

Fasten knitting, cut off the working thread. On 4 parts, cut the working thread taking into account the length required to stitch the two parts together.

We sew discs with a needle as shown in the photo

We make an axle for wheels. Cut off 2 thick skewers 15cm long.

We wrap the skewers with brown yarn, fix the ends with glue.

We insert one end of the skewer into the center of the wheel disk, first apply glue to the tip of the skewer.

Next, we pass the skewer through the “ears” on the frame. Previously, on the frame, it is necessary to bend the wings, giving them the shape of a ¼ circle, and it is also necessary to bend the “ears” to the bottom of the frame.

We put the second wheel on the other end of the skewer, first apply glue to the tip of the skewer.

Do the same with the remaining two wheels.

Pumpkin stand

Yarn: Pekhorka “Children’s novelty”, color – billiards

1st row: 6 sc in amigurumi ring

2nd row: (inc) – 6 times = 12 sc

3rd row: (sc, inc) – 6 times = 18 sc

4th row: (2 sc, inc) – 6 times = 24 sc

5 row: (3 sc, inc) – 6 times = 30 sc

6 row: (4 sc, inc) – 6 times = 36 sc

7 row: (5 sc, inc) – 6 times = 42 sc

8 row: (6 sc, inc) – 6 times = 48 sc

9th row: (7 sc, inc) – 6 times = 54 sc

10 row: (8 sc, inc) – 6 times = 60 sc

11 row: (9 sc, inc) – 6 times = 66 sc

12th row: (10 sc, inc) – 6 times = 72 sc

Row 13: (11 sc, inc) – 6 times = 78 sc

14 row: for the back walls of the loops we knit 78sc

15-19 rows: 78sc

We do not cut the working thread.

Cut two circles out of plastic or cardboard equal to the diameter of the connected circle. I got a circle with a diameter of 7cm

Apply a small amount of glue to one side of the cut out circle and glue it to the bottom of the knitted part. Fill the part with padding polyester or you can do it like me – with strips of cardboard. To do this, you need to cut strips of thick cardboard 1 cm wide, ≈ 95 cm long (I have 3.5 strips 38 cm long).

Apply glue to the bottom of the part

Twist the cardboard strips in a spiral into a circle and insert into the part.

We knit a “cover” for the stand

1st row: 6 sc in amigurumi ring

2nd row: (inc) – 6 times = 12 sc

3rd row: (sc, inc) – 6 times = 18 sc

4th row: (2 sc, inc) – 6 times = 24 sc

5 row: (3 sc, inc) – 6 times = 30 sc

6 row: (4 sc, inc) – 6 times = 36 sc

7 row: (5 sc, inc) – 6 times = 42 sc

8 row: (6 sc, inc) – 6 times = 48 sc

9th row: (7 sc, inc) – 6 times = 54 sc

10 row: (8 sc, inc) – 6 times = 60 sc

11 row: (9 sc, inc) – 6 times = 66 sc

12th row: (10 sc, inc) – 6 times = 72 sc

Row 13: (11 sc, inc) – 6 times = 78 sc

Fasten knitting, cut the working thread and hide the tip into the product.

Apply a small amount of glue to one side of the cut out circle and glue the “cover”.

We connect both parts by tying along the edge sc, according to the loop-to-loop principle.

Without cutting off the working thread, we knit a ruffle: from one loop we knit two

d4c andso around the entire perimeter of the product. When finished, tie the edges:

sl-st, ch, sl-st, ch – repeat to the end.

For carriage decor

Chest

Yarn: Troitskaya “Baby”, color – golden

Bottom of the chest

1st row: 21ch

2 row: starting from the 2nd loop from the hook, knit 20 sc

3-14 rows: 20sc

Fasten knitting, cut the working thread and hide the tip in the product.

Chest walls

2 details

1st row: 21ch

2 row: starting from the 2nd loop from the hook, knit 20 sc

3rd – 12th rows: 20sc

Fasten knitting, cut the working thread and hide the tip in the product.

Small chest walls

2 details

1st row: 13ch

2 row: starting from the 2nd loop from the hook, knit 12 sc

3 – 12 rows: 12sc

Fasten knitting, cut the working thread and hide the tip in the product.

We tie on three sides of the chest wall with yellow yarn Pekhorka “Children’s novelty”, color – yolk, sc, at the corners we knit 2sc from one loop.

We cut out blanks from thick cardboard to seal the chest, 1 cm less in volume than related products.

We connect the bottom and sides of the chest by knitting both sc parts according to the loop-to-loop principle. The walls of the chest are sewn together.

Chest lid

1st row: 21ch

2 row: starting from the 2nd loop from the hook, knit 20 sc

3 – 19 rows: 20sc

Fasten knitting, cut the working thread and hide the tip in the product.

Lid side walls

1st row: 13ch

2 row: starting from the 2nd loop from the hook, knit 12 sc, ch

3rd row: dec, 8sc, dec, ch

4th row: dec, 6sc, dec, ch

5 row: dec, 4, dec, ch

6 row: dec, 2sc, dec

Fasten knitting, cut the working thread and hide the tip in the product.

We tie the lid on all sides with yellow yarn Pekhorka “Children’s novelty”, color – yolk, sc, at the corners we knit 2sc from one loop.

Tie the side walls of the lid on three sides.

We cut out blanks from thick cardboard to seal the chest lid, 1 cm less in volume than related products. Bend the cardboard part of the lid as shown in the photo

Sew the details of the chest lid.

Side handles on the chest: use a needle and thread to sew a stitch and wrap with thread.

We knit a bolt for the lock: 6ch, starting from the 2nd loop from the hook we knit along the chain 5sc. Fasten knitting, cut the working thread, insert the ends of the thread into the lid and secure them. Use a needle and thread to secure the clasp. From the seamy side, apply glue to the bolt and glue it to the wall of the chest.

Chair for the coachman

Yarn: Pekhorka “Children’s novelty”, color – billiards

1st row: 6sc in amigurumi ring

2nd row: (inc) – 6 times = 12sc

3rd row: (sc, inc) – 6 times = 18sc

4th row: (2sc, inc) – 6 times = 24sc

5 row: (3sc, inc) – 6 times = 30sc

Without cutting off the working thread, we knit the petals: * 6ch, along this chain,

starting from the 2nd loop from the hook we knit sc, hdc, dc, hd2c, d2c,

join sl-st in the 3rd loop of the flower base *. Repeat knitting from * to * 9 more times. A total of 10 petals are obtained.

Small pumpkin

We knit with yarn “Pekhorka” “Children’s novelty” calendula color.

1st row: 6sc in amigurumi ring

2nd row: (inc) – 6 times = 12sc

3rd row: (sc, inc) – 6 times = 18sc

4th row: (2sc, inc) – 6 times = 24sc

5 row: (3sc, inc) – 6 times = 30sc

6-11 row: 30sc

12 row: (3sc, dec) – 6 times = 24sc

13 row: (2sc, dec) – 6 times = 18sc

14th row: (sc, dec) – 6 times = 12sc

Loosely fill with filler

15 row: dec – until the end of knitting.

Fasten knitting, cut off the working thread, taking into account the required length for pulling (dividing the pumpkin into slices). Thread the thread into the needle and through the center of the pumpkin we make tightening forming slices, slightly flattening the pumpkin. The number of slices – at your request, I got 5 of them.

Glue the pumpkin to the green base.

Wrap the pieces of wire with green yarn, twist the ends of the wire on one side. Form the legs for the highchair and glue them to the green base.

Flower

Yarn: Pekhorka “Children’s novelty”, color – yolk

3 pieces

1st row: 6 sc in amigurumi ring

2nd row: 6sc

3rd row: (inc) – 6 times = 12 sc

4th row: 12 sc

5th row: (inc, 3sc) – 3 times = 15 sc

6-7 rows: 15sc

Without cutting off the working thread, we knit the petals: * 6ch, along this chain, starting from the 2nd loop from the hook we knit sc, hdc, dc, hd2c, d2c, join sl-st in the 3rd loop of the flower base *. Repeat knitting from * to * 4 more times. A total of 5 petals are obtained. Glue a bead with a diameter of ≈ 1cm inside the flower

Wrap the pieces of wire with green yarn, connect them into a twig and twist the ends with a pencil into a spiral.

Assembling the carriage

I did not glue all the details of the carriage with hot melt glue, in the sequence as indicated in the photo, namely: glue the pumpkin stand in the middle of the frame, then apply glue to the tip of the wire and a little on the bottom of the wire of the coachman’s chair, glue it so that the tip is hidden under the shuttlecock of the stand for the pumpkin, then glue the pumpkin itself and the chest. Trying on a twig of wire, experimenting: laying it down, bending it in different directions, also trying on flowers. There is plenty of space for your imagination. I am a twig

fixed at three points: on the top of the head, near the pumpkin’s tail, in the middle, and the tip, which she hid under the pumpkin. I decorated the place of gluing with flowers.

Jellyfish Crochet pattern

Materials Needed:

Yarn: Big Twist light teal, red heart baby pink

Hook Sizes: E hook

18 mm safety eyes

scissors

sewing needle

stitch marker

fiber fill stuffing

Black embroidery thread for smile                                                                        

Abbreviations:

MR= Magic Ring

sc= single crochet

inc= increase

dec= decrease

(4 sc, inc) x 6= repeat pattern between parentheses 6 times

sl st= slip stitch

Head

With teal yarn and E hook

1. 6 sc into MR

2. inc x 6= 12

3. (sc, inc) x 6= 18

4. (2 sc, inc) x 6= 24

5. (3 sc, inc) x 6= 30

6. (4 sc, inc) x 6= 36

7. (5 sc, inc) x 6= 42

8. (6 sc, inc) x 6= 48

9. (7 sc, inc) x 6= 54

10. (8 sc, inc) x 6= 60

11-21. sc around

Place eyes between rows 17 and 18 leaving 11 holes apart

22. (8 sc, dec) x 6= 54

23. (7 sc, dec) x 6= 48

24. (6 sc, dec) x 6= 42

25. (5 sc, dec) x 6= 36

26. In BLO (4 sc, dec) x 6= 30

Start stuffing the head at this point

27. (3 sc, dec) x 6= 24

28. (2 sc, dec) x 6= 18

29. (sc, dec) x 6= 12

30. (dec) x 6= 6

F/O and sew the hole closed

31. In FLO of row 26

Attach yarn

hdc, dc, tr, dc, hdc all in one st, sl st in the next two sts

repeat around

Cheeks

With pink yarn and E hook

1. 6 sc into MR

2. inc x 6= 12

F/O and leave a long tail for sewing

Curly Tentacles

With teal yarn and E Hook

Make 7

1. Ch 71

2. sc in 2nd ch from hook, inc in next st

(sc, inc) across

Chain Tentacles

With teal yarn and E Hook

Make 5

1. ch 75

Assembly

Sew chain tentacles in the middle of the head in a small circle

Sew curly tentacles around the outside of the chain tentacles

in a circle underneath the jelly fold.

Sew on the cheeks right under the eyes.

Take your black embroidery thread and embroider a smile.

Term Used:

slst – slip stitch

ch – chain

sc – single crochet

inc – increase

dec – decrease

WHAT DO YOU NEED:

 • Blue, beige, white, red, black

 • White, black, yellow felt

 • Hook (I used a 3.5 mm hook with Caron Simply Soft wire)

 • fiber filling

 • fabric glue

 • Painting on white fabric (optional)

 • thread needle

 • Point marker (optional)

 This pattern works on continuous rounds.

HEAD

In blue thread

Row 1: 6 sc into magic ring [6]

Row 2: 6x inc [12]

Row 3: (sc, inc) 6x [18]

Row 4: (2sc, inc) 6x [24]

Row 5: (3sc, inc) 6x [30]

Row 6: (4sc, inc) 6x [36]

Row 7: (5sc, inc) 6x [42]

Row 8: (6sc, inc) 6x [48]

Row 9: (7sc, inc) 6x [54]

Row 10-18: 54 sc [54]

Row 19: (7sc, dec) 6x [48]

Row 20: (6sc, dec) 6x [42]

Row 21: (5sc, dec) 6x [36]

Row 22: (4sc, dec) 6x [30]

Row 23: (3sc, dec) 6x [24]

Row 24: (2sc, dec) 6x [18]

 Half sc in the next pt. Finish by leaving a

tail to sew. Stuffed stuff

fiber.

BODY

 Start in beige yarn

 Row 1: 6 sc into magic ring [6]

 Row 2: 6x inc [12]

 Row 3: 3x inc, 3sc, 3x inc, 3 sc [18]

 Row 4: 2sc, 3x inc, 6sc, 3x inc, 4 sc [24]

 Row 5: (3sc, inc) 6x [30]

 Row 6: (4sc, inc) 6x

[36] Switch to wire

blue

Row 7: BLO 36 sc [36]

Row 8-13: 36 sc [36]

Row 14: (4sc, dec) 6x [30]

Row 15: (3sc, dec) 6x [24]

Row 16: (2sc, dec) 6x [18]

Row 17: (sc, dec) 6x [12]

Row 18: 6x dec [6]

 Half sc in the next pt and leave a tail. Fill the

body and close the hole. Do not sew yet

head on the body.

MOUTH

Beige thread, ch 23

Row 1: start on the 2nd ch. from the

hook, 22 sc on both sides [44]

Row 2: 6sc, 3hdc, 4dc, 3hdc, 6sc, 8sc, hdc,

dc, 2double dc, dc, hdc, 8 sc [44]

 Half sc in the next pt and leave a tail for

to sew.

NOSE

In black thread

Row 1: 4 sc into magic ring [4]

Row 2-4: 4 sc [4]

Half sc in the next pt, leave a tail

to sew. Don’t sew your nose yet

in the mouth.

EARS (DO TWO)

Start in beige yarn, ch 2

Row 1: sc on the 2nd ch. hook, ch. 1,

turn [1]

Row 2: inc, ch 1, turn [2]

Row 3: inc 2x, ch 1, turn [4]

Row 4: inc, 2sc, inc, ch 1, turn [6]

Row 5: 6 sc [6]

snatch. Now you will do the part

blue ear.

Row 1: Take your blue yarn and sc on both

sides of the ear, then ch 1, turn [11]

Row 2: FLO 5 sc, inc, 5 sc [12]

Row 3-4: 12 sc [12]

 Row 5: 2hdc, 3sc, dec, 3sc, 2pm [11]

Half sc, leave a tail to close the part of

behind the ear and sew it.

GREAT POINTS (MAKE SIX)

In blue thread

Row 1: 4 sc into magic ring

Row 2: 4 sc [4]

Row 3: (sc, inc) 2x [6]

Row 4: 6 sc [6]

Row 5: (2sc, inc) 2x [8]

Row 6: (3sc, inc) 2x [10]

Row 7: (4sc, inc) 2x [12]

Row 8: inc x2, 10 sc [14]

Row 9: (6sc, inc) 2x [16]

Row 10: inc 2x, 14 sc [18]

Row 11: (8sc, inc) 2x [20]

Row 12: inc 2x, 18 sc [22]

Row 13: (10sc, inc) 2x [24]

Row 14: inc 2x, 22 sc [26]

Half sc in the next pt and stuff.

Leave a tail to sew.

You will assemble your head now.

Start by cutting a piece of felt

white eye shape. Wired

blue, make a long chinginha the

enough to get around the eyes (see

figure). With black thread, embroider a mouth

little. Sew the mouth, the nose, fix the

white part of the eyes with glue

fabric and add small pieces of

black felt to complete the eyes. I

I used white

Fabric paint in your eyes, but you

you can also use a small

piece of white felt. Sew the

chente you just made to

around the eyes.

Sew the ears on the head and sew

the ends at the back of the head.

Tip: I like to bend the ends to

get the exact shape I want.

Now that the head is complete,

you can sew it on the body.

SPIKE (BODY)

In blue thread

Row 1: 4 sc into magic ring [4]

Row 2: 4 sc [4]

Row 3: (sc, inc) 2x [6]

Row 4: 6 sc [6]

Row 5: (2sc, inc) 2x [8]

Row 6: (3sc, inc) 2x [10]

Row 7: (4sc, inc) 2x [12]

Row 8: inc 2x, 10 sc [14]

Row 9: (6sc, inc) 2x [16]

Row 10: inc 2x, 14 sc [18]

Row 11: (2sc, inc) 6x [24]

 Half sc in the next pt and stuff. Leave

a tail to sew.

MINOR POINT (BODY)

In blue thread

Row 1: 4 sc into magic ring [4]

Row 2: 4 sc [4]

Row 3: (sc, inc) 2x [6]

Row 4: 6 sc [6]

Row 5: (2sc, inc) 2x [8]

Row 6: 8 sc [8]

Row 7: (3sc, inc) 2x [10]

Row 8: 10 sc [10]

Row 9: inc 2x, 8 sc [12]

Row 10: 12 sc [12]

 Half sc in the next pt and stuff. Leave a

tail to sew.

LEGS (DO TWO)

Start with red thread

Row 1: 6 sc into magic ring [6]

Row 2: (2sc, inc) 2x [8]

Row 3: (3sc, inc) 2x [10]

Row 4: (4sc, inc) 2x [12]

Row 5: (5sc, inc) 2x [14]

Row 6: (6sc, inc) 2x [16]

Row 7: (7sc, inc) 2x [18]

Row 8: (8 sc, inc) 2x [20]

Row 9: (9sc, inc) 2x [22]

Row 10: (10sc, inc) 2x [24]

Row 11: ch 1, turn, 22 sc [22]

Row 12-13: ch 1, turn, 22 sc [22]

Row 14: ch 1, turn, 8 sc [8]

Row 15-19: ch 1, turn, 8 sc [8]

 Turn your work inside out. You

should be shaped like a foot with a

chentinha in the back, like a door. sc

to start closing the chentinha [8], then

 sc to close the heel [6].

Tighten and turn the shoe inside out. The wrong side

it must be on the inside.

Row 1: take your red wire

again and do 15 sc around the

hole left foot [15]

Change to the blue wire. Fill your foot with

fiber fill and continue

filling as you go.

Row 2: (sc, dec) 5x [10]

Row 3-17: 10 sc [10]

Half sc in the next pt. Complete and stuffing

leave a tail to sew.

SOCKS (DO 2)

In white thread, ch 20

Row 1: start at the 3rd chente from the

hook, 18 dc, ch 2, turn [18]

 Row 2: 18 dc, ch 2, turn [18]

Row 3: 18 AD [18]

 HALF SC, leaving a tail to sew.

Sew the socks around the feet. They should

adjust freely.

WHITE STRIPES (DO TWO)

In white thread, ch 16

Row 1: start at the 3rd chentinha do hook,

14 AD [14]

Half sc, leaving a tail to sew.

Sew on the feet. Using yellow felt,

cut small buckles to stick to the feet.

ARMS (MAKE TWO)

 Start with white thread. Hands are

made in two parts, then joined.

THUMB:

Row 1: 4 sc into magic ring [4]

Row 2: (sc, inc) 2x [6]

Row 3-5: 6 sc [6]

Half sc in the next pt and leave a small

tail.

MOST:

In white thread, ch 7

Row 1: start in the 2nd chentinha from

hook, 6 sc on both sides of the

chentinha [12]

Row 2: 12 sc [12]

Row 3: (2SC, Inc.) 4x [16]

Row 4-6: 16 sc [16]

Row 7 Join this part with your thumb.

Keep working. 4 sc around the

thumb, skip 2 pt on the thumb and part

greater, 14 sc in the greater part [18]

Using the end of the wire left by the

thumb, close the small hole.

Start filling and continue as

advances.

Row 8 (sc dec) 6x [12]

Row 9-10: 12 sc [12]

Change to beige yarn

Row 11: (4 ° C, dec) 2x [10]

Row 12-20: 10 sc [10]

Row 21: 5x dec [5]

 Half sc in the next pt. Finish the filling and leave

a tail to sew.

CUFFS (DO TWO)

In white thread, ch 18

Row 1: start at the third chentinha

from hook, 16 dc, ch 1, turn [16]

Row 2: 16 dc, ch 1, turn over [16]

Row 3: 16 AD [16]

Half sc and leave a tail to sew.

Sew on the arms. They must

adjust freely.

Sew legs and arms on

body, then the spines on the back.

Materials:

Smooth yarn the same thickness (I have 100 g – 400 m)

– for body – blue color – 20 g;

– for turban – white color;

– for lamp – yellow or light brown color;

– for jacket – as you wish;

A hook for your yarn (I have 1,25);

Filler;

Eyes – ready or pieces of felt;

Wire – 2 pieces for 5 cm;

Glue;

Needle, thread for contractions;

Beads, sequins, beautiful button;

A little brown, pink and yellow moulinet.

Abbreviations:

ch – chain

st – stitch

sl st – slip stitch

sc – single crochet

inc – increase (2 sc in 1 st)

dec – decrease (single crochet two stitches together)

hdc – half double crochet

3 in 1 – 3 sc in 1 loop

(…) x N times – repeat instructions in brackets N times

Head – body

Stuff firmly but do not overstuff.

1 Rnd: 6 sc in magic ring

2 Rnd: 6 inc (12)

3 Rnd: (1 sc, inc)х 6 times (18)

4 Rnd: 1 sc (inc, 2 sc)х 5 times, inc, 1 sc (24)

5 Rnd: (3 sc, inc)х 6 times (30)

6 Rnd: 2 sc (inc ,4 sc)х 5 times, inc, 2 sc (36)

7 Rnd: (inc ,5 sc) х 6 times (42)

8-12 Rnd: 42 sc (42)

13 Rnd: 42 sc (42) mark 14-th st. The middle.

14 Rnd: 3 sc, (inc, 1 sc)х5 times, 1 sc, (1 sc, inc) х5 times, 18 sc (52)

15 Rnd: 5 sc, (inc, 2 sc) х4 times, inc, 1 sc, inc, (2 sc, inc) х4 times, 20 sc (62)

16-18 Rnd: 62 sc (62)

19 Rnd: 4 sc, (dec ,1 sc) х14 times, 16 sc (48)

20 Rnd: 31 sc, (dec ,3 sc) х3 times, dec (44)

21 Rnd: 3 sc, (dec ,2 sc) х7 times, dec, 4 sc, dec, 3 sc, dec (34)

22 Rnd: (6 sc, dec ,7 sc, dec)х2 times (30)

23 Rnd: (3 sc, dec) х6 times (24)

24 Rnd: (2 sc, dec) х6 times (18)

25-26 Rnd: 18 sc (18)

27 Rnd: 4 sc, dec, 7 sc, dec, 3 sc (16)

28 Rnd: 16 sc (16)

Stuff the head tightly and continue working the body. While

working, you will need to keep the work symmetrical.

29 Rnd: 4 sc, ch 5, from the second loop from hook: 4 sc, 8 sc,

ch 5, from the second loop from hook: 4 sc, 4 sc (24)

30 Rnd: 4 sc, along the other side of the chain: 3 sc, inc, 12 sc,

along the other side of the chain: 3 sc, inc, 8 sc (34)

31-32 Rnd: 34 sc (34)

33 Rnd: 5 sc, dec, 4 sc, dec, 9 sc, dec, 4 sc, dec, 4 sc (30)

34 Rnd: 6 sc, 2 dec, 11 sc, 2 dec, 5 sc, (26)

35 Rnd: 2 sc, inc, 3 sc, dec, 2 sc, (inc ,1 sc) х 3 times, inc, 2 sc, dec, 3 sc, inc, 1 sc (30)

36 Rnd: 2 sc, inc, 8 sc, (inc ,2 sc)х 4 times, 6 sc, inc (36)

37 Rnd: 36 sc (36)

38 Rnd: (5 sc, inc) х 6 times (42)

39-42 Rnd: 42 sc (42)

43 Rnd: (5 sc, dec) х 6 times (36)

44 Rnd: 36 sc (36)

45 Rnd: (4 sc, dec) х 6 times (30)

46 Rnd: (3 sc, dec) х 6 times (24)

Continue working in rows.

47 Row: 16 sc, dec, ch 1, turn , skip 1, 14 sc, dec, ch 1, turn , skip 1, (1 sc, dec)х5 times (5th dec is perfomed on bevel), 1 sc, 5 sl st (16)

Continue working in runds.

48 Rnd: on bevel 2 sc together, 16 sc (17)

49 Rnd: 12 sc, 5 sl st (17)

50 Rnd: 2 sc, 3 dec, 9 sc (14)

51 Rnd: 2 sc, 2 dec, 3 sc, 4 sl st , 1 sc (12)

52 Rnd: 2 sc, dec, 8 sc (11)

53 Rnd: 2 sc, dec, 7 sc (10)

54 Rnd: 2 sc, dec, 6 sc (9)

55 Rnd: (dec ,1 sc) х3 times (6)

56 Rnd: (1 sc, dec ) х2 times (4)

Fasten off. Stuff.

Arms (make 2)

Stuff firmly but do not overstuff.

1 Rnd: 6 sc in magic ring

2 Rnd: 6 inc (12)

3-5 Rnd: 12 sc (12)

6 Rnd: (4 sc, dec ) х2 times (10)

7-8 Rnd: 10 sc (10)

9 Rnd: 2 sc, 3 hdc in 1 loop, 3 sc, 3 sl st , 1 sc (12)

10 Rnd: 2 sc, 3 hdc together, 7 sc (10)

11 Rnd: 10 sc (10)

12 Rnd: 2 sc, dec, 6 sc (9)

13 Rnd: 9 sc (9)

14 Rnd: 6 sc, dec, 1 sc (8)

15 Rnd: (1 sc, inc) х 4 times (12)

Fingers:

16 Rnd:. 10 sc, thumb: – ch 3, from the second loop from hook:

2 sc, 1 sl st along the arm.

Place a round marker here.

17 Row: Fold the arm in half and crochet 5 sc, taking both cloths. Turn.

18 Row: (ch 3, from the second loop from hook: 2 sc, 1 sl st along the arm) repeat 4 times

Fasten off, cut the yarn.

Bracelet

1 Rnd: ch 13, from the second loop from hook: 12 sc.

Wrap around genie wrist and sew it up.

Turban

Knit with white yarn.

1 Rnd: 6 sc in magic ring

2 Rnd: 6 inc (12)

3 Rnd: (1 sc, inc) х 6 times (18)

4 Rnd: 1 sc (inc , 2 sc) х5 times, inc, 1 sc (24)

5 Rnd: (3 sc, inc) х 6 times (30)

6 Rnd: 2 sc, (inc ,4 sc) х 5 times, inc, 2 sc (36)

7 Rnd: (inc ,5 sc) х 6 times (42)

8 Rnd: 3 sc (inc ,6 sc) х 5 times, inc, 3 sc (48)

9-11 Rnd: 48 sc (48)

12 Rnd: (15 sc, inc) х 3 times (51)

13-15 Rnd: 51 sc (51)

Fasten off, cut the yarn.

Turban lapel

1 Rnd: ch 69, from the second loop from hook: 67 sc, 3 sc in

the last loop, along the other side of the chain: 66 sc, inc (138)

2 Rnd: inc, 66 sc, 3 inc, 66 sc, inc, 1 sc (143)

3 Rnd: 4 sc (dec ,4 sc) х10 times, dec, 10 sc, (dec ,2 sc)х16 times, 3 sc (116)

ASSEMBLY

sew the wider edge of lapel to the bottom edge of the cap,

while the lateral edges (where the curvature) smoothly lift to

the level of the 8th round, make overlap one edge of the part

to another. Ahead should get a triangle, where later to glue the

decoration. Sew the narrower side, stepping 4 rounds up from

the bottom edge of the cap. Add filler to the resulting gap

between the cap and the top. Decorate at your discretion (with

beads, rhinestones, buttons, feathers)

Jacket

1 Rnd: ch 7, from the second loop from hook: 3 in 1, 4 sc, 3 in

1, along the other side of the chain: 4 sc (14)

2 Rnd: 3 inc, 4 sc, 3 inc, 4 sc (20)

3 Rnd: 1 sc, 3 in 1, 2 sc, 3 in 1, 6 sc, 3 in 1, 2 sc, 3 in 1, 5 sc (28)

4 Rnd: 3 sc, 13 ch, skip 4 sc, 1 sc, inc, 6 sc, inc, 1 sc, 13 ch, skip 4 sc, 4 sc, dec, 1 sc (47)

5 Rnd: dec, 1 sc, along the chain: 1 sc (inc ,2 sc) х 4 times, skip 1

sc, 2 sc, inc, 5 sc, inc, 2 sc, along the chain: (2 sc, inc) х 4 times, 1 sc, skip 1 sc, 5 sl st (54)

6 Rnd: 2 sl st , 6 sc, inc, 4 hdc, 2 hdc in 1 loop, 2 hdc, 1 sc, inc, 2 sc, 11 sl st, 2 sc, inc, 1 sc, 2 hdc, 2 hdc in 1 loop, 4 hdc, inc, 5 sc, 1 sl st

Fasten off, cut the yarn. Decorate as you like.

Genie lamp

Knit with yellow or light brown yarn.

1 Rnd: 6 sc in magic ring

2 Rnd: 6 inc (12)

3 Rnd: (1 sc, inc) х 6 times (18)

4 Rnd: 18 sc into the back loop only (18)

5 Rnd: (1 sc, dec ) х6 times (12)

6 Rnd: 12 sc (12)

7 Rnd: 12 inc (24)

8 Rnd: (3 sc, inc) х 6 times (30)

9-10 Rnd: 30 sc (30)

11 Rnd: (3 sc, dec ) х6 times (24)

12 Rnd: (2 sc, dec ) х6 times (18)

13 Rnd: (dec ) х9 times (9)

14 Rnd: 9 sc (9) Stuff the lamp.

15 Rnd: (1 sc, dec ) х3 times (6)

16 Rnd: 6 sc (6)

17 Rnd: (inc ,1 sc) х 3 times (9)

18 Rnd: (inc ,2 sc) х 3 times (12)

Fasten off, cut the yarn.

Handle

1 Row: ch 8, from the second loop from hook: 7 sc.

Fasten off, cut the yarn, leaving the long thread for sewing. Sew a handle. To decorate the lamp with embroidery or beads.

Ears (make 2)

1 Row: ch 2, 3 sc in the last loop, ch 1, turn (3)

2 Row: inc, 1 sc, inc (5)

Fasten off, cut the yarn, leaving the long thread for sewing.

Décor

Define the points for pull down.

In the 13th round, mark the 3rd and 4th column from the

center to the left, from the 3rd column at the same level, go

down 4 rounds, mark, move down 2 more rounds and 2

columns to the left, mark. Symmetrically mark for the right

side of the point.

Introduce the needle with a long strong thread in the back of

the head, leave a small segment of the thread sticking out.

Lead out at the point of the eye, retreating 1 column, insert the

needle at another point of the eye, lead out at the upper point

of the cheeks, and tighten. Stretching the thread from above,

insert the needle into the lower point of the cheeks, lead it out

at the first point of the eye, tighten it, repeat. Remove the

needle again at the starting point of the head, tie 2 knots, hide

the ends inside. Similarly, pull the second side.

Then slightly tighten the nose between the nearest points of

the eye, lead out the needle in the back of the head, tie a knot,

hide it inside.

Attach the arms with the thread fastening.

Embroider the nose with several stitches, grabbing 3 central

columns of the 15th round. Embroider mouth with pink

thread, eyebrow – with brown.

Sew ears between 10 and 14 rounds, departing from the

central loop of 10 columns.

Glue eyes.

Genie is ready to make your wishes come true!

Author of this article and many other community members

look forward for your feedback.

Terms Used:

slst – slip stitch

ch – chain

sc – single crochet

inc – increase

dec – decrease

We will need:

1) plush yarn

DOLPHIN BABY (Dolphin baby),

Color 80346

100 g, 120 m, 100% polyester

2 hanks (for knitting the toy itself) – it took me a little

less than 2 hanks

2) plush yarn

DOLPHIN BABY (Dolphin baby),

Color 80314

100 g, 120 m, 100% polyester

half hank (needed to make an insole at the legs

Sonya, hairdo, face)

3) plush yarn

DOLPHIN BABY (Dolphin baby),

Color 80336 and 80337

100 g, 120 m, 100% polyester

less hank (needed to make tail and ears)

4) Gazzal baby cotton yarn

Color 3433

50 gr, 165 m, 40% cotton, 60% acrylic

less hank (for Sonya nose)

5) Gazzal baby cotton yarn

Color 3415

50 gr, 165 m, 40% cotton, 60% acrylic

less hank (for Sony dresses)

6) YarnArt Jeans yarn

Color 42 – 1 pail (the main color for knitting Sonya’s clothes,

claws, earrings)

50p, 160 m, 55% cotton, 45% acrylic

7) Yarn Alize Cotton Golg

100 g, 330 m, 55% – cotton, 45% – acrylic

Color 122 – less hank (for knitting caramel on a dress

Sonya)

8) cotton eye yarn – I used Camtex (cotton

mercerized), 50 g, 200 m, 100% cotton, white and

the black

9) Hook number 2 (for knitting clothes); No. 3,5 (for knitting

toys); hook number 1.3 (for knitting eyes)

10) 1 button

11) Needle for sewing parts (I used thinner –

for ordinary sewing threads to sew on eyes; and

thicker – when I sewed handles and ears to Sonya’s body)

12) Regular sewing threads in black, white and pink

colors to sew eyes and claws

13) Marker

14) Cardboard and tape to make an insole for Sonya’s legs

15) Hollofiber

16) Good mood

Well! Go! 

Sonya’s legs

Take the thread Himalaya Dolphin Baby color 80314, hook number 3.5

1 row: 8 sc into magic ring (8)

2 row: 8 inc (16)

3 row: (1 sc, 1 inc) * 8 (24)

4 row: (2 sc, 1 inc) * 8 (32)

5 row: 32 ss (32)

6 row: 32 sc (32)

7 row: we take yarn of color 80346 (main color) and knit 32 sc (32)

At this stage, we make the insole using cardboard and tape

8 row: (14 sc, 1 dec) * 2 (30)

9 row: (13 sc, 1 dec) * 2 (28)

10 row: (12 sc, 1 dec) * 2 (26)

11 row: (11 sc, 1 dec) * 2 (24)

12 row: (10 sc, 1 dec) * 2 (22)

13 row: (9 sc, 1 dec) * 2 (20)

14 row: (8 sc, 1 dec) * 2 (18)

15 row: (7 sc, 1 dec) * 2 (16)

We stuff a detail

16 row: (6 sc, 1 dec) * 2 (14)

17 row: (5 sc, 1 dec) * 2 (12)

18 row: 12 sc (12)

We stuff the toy.

The first leg is ready, the second is knitted in the same way.

Knit pens

We take the thread Himalaya Dolphin Baby color 80346, hook number 3.5

1 row: 9 sc into magic ring (9)

2 row: 9 inc (18)

3 row: (1 sc, 1 inc) * 9 (27)

4 row: 27 sc (27)

5 row: 25 sc, 1 dec (26)

6 row: (11 sc, 1 dec) * 2 (24)

7 row: (10 sc, 1 dec) * 2 (22)

8 row: (9 sc, 1 dec) * 2 (20)

9 row: (8 sc, 1 dec) * 2 (18)

10 row: (7 sc, 1 dec) * 2 (16)

We stuff a detail

11 row: (6 sc, 1 dec) * 2 (14)

12 row: (5 sc, 1 dec) * 2 (12)

13 row: (4 sc, 1 dec) * 2 (10)

14 row: (3 sc, 1 dec) * 2 (8)

15-17 row: 8 sc (8) – that is, repeat 3 times

We stuff the toy, we bind together the remaining ring (i.e.

knit the opposite loops of the ring together)

Knit claws

Take YarnArt Jeans yarn, color 42, hook No. 2

1 row: 4 SC in, ring (4)

2 row: 4 İNC (8)

3 row: (1 SC, 1 İNC) * 4 (12)

4-5 row: 12 SC (12)

We leave a little tail – we will also sew it. We knit such

4 claw and sew to Sonya’s paw, while stuffing a little.

The first paw is ready, we knit the second in the same way.

Sonya’s body

We take the thread Himalaya Dolphin Baby color 80346, hook number 3.5

1 row: 8 sc into magic ring (8)

2 row: 8 inc (16)

3 row: (1 sc, 1 inc) * 8 (24)

It turned out such a detail

This is, let’s say, Sonya’s “pussiko”, and it needs to be connected to her legs.

I sew with thread YarnArt Jeans 2 loops together each

leg.

4th row: set the marker, look at the photo where it is

working thread. We knit a row, we calculated the loops – it should turn out

40 stitches (40)

5 row: (4 sc, 1 inc) * 8 (48)

6 row: (5 sc, 1 inc) * 8 (56)

7-9 row: 56 sc (56) – that is, repeat 3 rows

10 row: (26 sc, 1 dec) * 2 (54)

11 row: (25 sc, 1 dec) * 2 (52)

12 row: (24 sc, 1 dec) * 2 (50)

13 row: (23 sc, 1 dec) * 2 (48)

14 row: (10 sc, 1 dec) * 4 (44)

As we knit, we stuff the toy

15 row: (9 sc, 1 dec) * 4 (40)

16 row: (8 sc, 1 dec) * 4 (36)

17 row: (7 sc, 1 dec) * 4 (32)

18 row: (6 sc, 1 dec) * 4 (28)

19 row: (5 sc, 1 dec) * 4 (24)

From this moment, knitting begins

20 row: (3 sc, 1 inc) * 6 (30)

21 row: (2 sc, 1 inc) * 10 (40)

22 row: (3 sc, 1 inc) * 10 (50)

23 row: (4 sc, 1 inc) * 10 (60)

24 row: (5 sc, 1 inc) * 10 (70)

25-29 row: 70 sc (70) – we knit 5 rows

30 row: (5 sc, 1 dec) * 10 (60)

31 rows: starting from this row we will also need Himalaya yarn

Dolphin Baby color 80314. We introduce the following notation:

Color 80314 – red, we will denote the letter (k)

Color 80346 – pink, will be denoted by the letter (p)

We knit 22 sc (k), 38 sc (p) (60) – that is, we knit 22 single crochet

color 80314 and then knit another 38 single crochet

80346

32 row: 1 sc (p), 20 sc (c), 39 sc (p) (60)

33 row: 2 sc (p), 18 sc (k), 40 sc (p) (60)

34 row: 3 sc (p), 8 dec (k), 41 sc (p) (52)

35 row: 4 sc (p), 4 dec (k), 40 sc (p) (48)

36-37 row: 48 sc (p) – we knit 2 rows

38 row: from this row we knit in only one color – 80346

(6 sc, 1 dec) * 6 (42)

As we knit, we stuff the toy

39 row: (5 sc, 1 dec) * 6 (36)

40 row: (4 sc, 1 dec) * 6 (30)

41 row: (3 sc, 1 dec) * 6 (24)

42 row: (2 sc, 1 dec) * 6 (18)

43 row: (1 sc, 1 dec) * 6 (12)

44 row: 6 dec (6)

Tighten the thread, cut and hide

Knit ears

Take the thread Himalaya Dolphin Baby color 80336, hook number 3.5

1 row: 9 sc into magic ring (9)

2 row: 1 sc, 1 inc, 2 sc, 1 inc, 2 sc, 1 inc, 1 sc (15)

3 row: 2 sc, 1 inc, 4 sc, 1 inc, 4 sc, 1 inc, 2 sc (21)

4 row: 3 sc, 1 inc, 6 sc, 1 inc, 6 sc, 1 inc, 3 sc (27)

5 row: take yarn Himalaya Dolphin Baby 80337 and knit 4 sc, 1 inc,

8 sc, 1 inc, 8 sc, 1 inc, 4 sc (33)

6 row: we knit 5 sc, unfold the knitting, do 1 ch and knit 9

sc.

We fix the thread, cut it, hide it

Knit eyes

We use Kamtex yarn (mercerized cotton) white

colors, hook number 1.3

1 item:

1 row: 8 sc into magic ring (8)

2 row: 8 inc (16)

3 row: (1 sc, 1 inc) * 8 (24)

4 row: (2 sc, 1 inc) * 8 (32)

5 row: (3 sc, 1 inc) – repeat only 2 times. Tighten the thread

trim and hide

Next, we take Kamtex black and tie the eyelids 18

sl-st. If this is the right eye, then continue to knit in the same

direction after you have finished knitting eye protein. If a

this is the left eye, then as soon as you finish knitting the white of the eye,

counted 18 stitches back and knit 18 sl-st.

Tighten the thread, cut and hide

2 detail:

1 row: 8 sc into magic ring (8)

Tighten the thread, cut and hide

2nd part is ready. We also knit such 2 details.

We use yarn Kamteks (mercerized cotton) black

colors, hook number 1.3

3 detail:

1 row: 8 sc into magic ring (8)

2 row: 8 inc (16)

3 row: (1 sc, 1 inc) * 8 (24)

3rd part is ready. We also knit such 2 details.

All details are ready. Now we form 2 eyes, i.e.

sew parts using ordinary black sewing threads

and white for the rear walls of the loop. Also then yarn

Camtex of white color, I made 2 highlights on each eye (2

seam)

Knit a nose

We take the yarn Gazzal baby cotton, color 3433, hook No. 2

1 row: 9 sc into magic ring (9)

2 row: 1 sc, 1 inc, 2 sc, 1 inc, 2 sc, 1 inc, 1 sc (15)

3 row: 2 sc, 1 inc, 4 sc, 1 inc, 4 sc, 1 inc, 2 sc (21)

4 row: 3 sc, 1 inc, 6 sc, 1 inc, 6 sc, 1 inc, 3 sc (27)

5 row: 4 sc, 1 inc, 8 sc, 1 inc, 8 sc, 1 inc, 4 sc (33)

6 row: 33 sc

We fix the thread, cut

Knit tail

We take yarn Himalaya Dolphin Baby color 80346, hook number 3.5

1 row: 8 sc into magic ring (8)

2 row: 8 inc (16)

3 row: (1 sc, 1 inc) * 8 (24)

4 row: (2 sc, 1 inc) * 8 (32)

5-6 row: 32 sc (32) – that is, repeat 2 rows

Take yarn Himalaya Dolphin Baby color 80336

7-10 row: 32 sc (32) – that is, repeat 4 rows

Take yarn Himalaya Dolphin Baby color 80346

11 row: (14 sc, 1 dec) * 2 (30)

12 row: (13 sc, 1 dec) * 2 (28)

13 row: (12 sc, 1 dec)*2 (26)

14 row: (11 sc, 1 dec) * 2 (24)

As we knit, we stuff the part

Take yarn Himalaya Dolphin Baby color 80336

15 row: (10 sc, 1 dec) * 2 (22)

16 row: (9 sc, 1 dec) * 2 (20)

17 row: (8 sc, 1 dec) * 2 (18)

18 row: (7 sc, 1 dec) * 2 (16)

Take yarn Himalaya Dolphin Baby color 80346

19 row: (6 sc, 1 dec) * 2 (14)

20-22 row: 14 sc (14) – that is, repeat 3 rows

Take yarn Himalaya Dolphin Baby color 80336

23-26 row: 14 sc (14) – that is, repeat 4 rows

Take yarn Himalaya Dolphin Baby color 80346

27-30 row: 14 sc (14) – that is, repeat 4 rows

The tail is ready, the thread was tightened, cut

Bangs Sonya

Take yarn Himalaya Dolphin Baby color 80314, hook number 3,5

1 piece (we knit in the amount of 1 pc):

1 row: 8 sc into magic ring (8)

2 row: 8 inc (16)

3 row: (1 sc, 1 inc) * 8 (24)

4-7 row: 24 sc (24) – that is, repeat 4 rows

8 row: (1 sc, 1 dec) * 8 (16)

9 row: 8 dec (8)

Fill the part, tighten, cut the thread and hide

2 part (we knit in the amount of 2 pieces):

1 row: 8 sc into magic ring (8)

2 row: 8 inc (16)

3 row: 16 sc (16)

4 row: 8 dec (8)

Fill the part, tighten, cut the thread and hide

3 part (we knit in the amount of 1 pc)

1 row: 8 sc into magic ring (8)

2-3 row: 8 sc (8) – that is, repeat 2 rows

Fill the part, tighten, cut the thread and hide

Sony Earrings

Take YarnArt Jeans yarn, color 42, hook No. 2

1 row: 8 sc into magic ring (8)

2 row: 8 inc (16)

3-5 row: 16 sc (16) – that is, we knit 3 rows

6 row: 8 dec (8)

Fill the part, tighten, cut the thread and hide. Such details

we knit 2 pcs.

Face design

1. Make eyebrows – I sew using black Gazzal yarn

baby cotton, tilted

2. I sew the mouth on the left side as a smile. Take yarn

Gazzal baby cotton black, gaining 12 air

eyelets (and the mouth is ready)

3. Using DOLPHIN BABY yarn (Dolphin baby) 80314

make Sonya’s face on the right and left two stripes – two

stitch

We knit a dress for Sonya

Take YarnArt Jeans yarn, color 42, hook No. 2

1 row: we collect 66 air loops + 3 lifting loops

The distribution of the loops will be as follows:

Back – 20 eyelets

Sleeves – 9 stitches each

Before – 24 stitches

And 4 raglan eyelets (we knit raglan according to the scheme – 2 dc, 1 ch, 2 dc)

So, we knit 1 row: in the 4th loop we knit 1 dc, we knit another 9 dc,

raglan, 9 dc, raglan, 24 dc, raglan, 9 dc, raglan, 10 dc

2 row: expand the knitting, 3 ch, 11 dc, raglan, 13 dc, raglan, 28

dc, raglan, 13 dc, raglan, 12 dc

3 row: expand the knitting, 3 ch, 13 dc, raglan, 17 dc, raglan, 32

dc, 1 raglan, 17 dc, 1 raglan, 14 dc

4th row: in this row you need to connect Sonya’s dress “under the arms” in

sleeves continue to knit on Sonya herself

So, we unfold the knitting, 3 ch, 15 dc, then for the air

we connect the loop of this and the next raglan in the sleeve of the dress,

knitting 1 dc, then we knit 36 ​​dc, then in the same way

we connect in a sleeve (2 air loops of two raglans

we knit together 1 dc), then we knit another 16 dc and do

connecting column.

I got 70 stitches.

5 row: expand the knitting, 3 ch, 12 dc, 1 inc, (13 dc, 1 inc) * 4, 1 sl-st

(75)

6 row: expand the knitting, 3 ch, 13 dc, 1 inc, (14 dc, 1 inc) * 4, 1 sl-st

(80)

7 row: expand the knitting, 3 ch, 14 dc, 1 inc, (15 dc, 1 inc) * 4, 1 sl-st

(85)

8-10 row: unfold the knitting, 3 ch, 84 dc, 1 sl-st (85) – that is

repeat 3 rows

We take the yarn Gazzal baby cotton color 3415, hook No. 2

11-14 row: we do not unfold the knitting anymore, 3 ch, 84 dc (85)

The thread was fastened, cut and hidden.

Sew the button to the dress and make a buttonhole for 10

ch.

Next, we knit candy for Sonya’s dress.

We take the yarn Alize Cotton Golg, color 122, hook No. 2

1 row: 8 sc into magic ring (8)

2 row: 8 inc (16)

3 row: (1 sc, 1 inc) * 8 (24)

4 row: (2 sc, 1 inc) * 8 (32)

Now we continue to knit a wrapper (do not cut the thread):

1 row: we knit 4 increases, but we knit 3 from each loop

column. That is, the wrapper is obtained from 12 columns.

2 row: take yarn Gazzal baby cotton color 3415, unfold

knitting, 1 ch, 11 sc (12)

3 row: Alize Cotton Golg yarn, color 122, expand the knitting, 1 ch,

11 sc (12)

4 row: take the yarn Gazzal baby cotton color 3415, unfold

knitting, 1 ch, 11 sc (12)

5 row: Alize Cotton Golg yarn, color 122, expand the knitting, 1 ch,

11 sc (12)

We fix the thread, cut it and hide it.

The wrapper on one side of the candy is ready, similarly knit with

opposite side of the circle.

Materials and tools:

– plush yarn Himalaya Dolphin Baby (120 m / 100 g, 100% polyester),

colors goldec oh and white;

– Yarn Art Jeans yarn (160 m / 50 g, 55% cotton, 45% acrylic),

brown and orange, a thread of red for the mouth;

– hooks No. 4 and No. 2;

– filler (holofiber, syntepuh);

– eyes on a secure mount with a diameter of 7-8 mm;

– white sewing thread and a large needle for stitching parts;

– scissors;

– marker or contrasting thread;

– tailor pins.

When using specified or similar materials, the toy

it turns out about 17 cm tall.

Abreavations

inc – increase

dec – decrease

ch – chain

sc – single crochet

DC – double crochet

Body – head:

We start in white

1) 6 sc into magic ring (6)

2) 6 inc (12)

3) (1 sc, inc) * 6 (18)

4) (2 sc, inc) * 6 (24)

5) (3 sc, inc) * 6 (30)

6-9) 30 sc (30) – 4 rows

Change the color to goldec oh

10) 30 sc turn (30)

11) 30 sc

12) (3 sc, dec) * 6 (24)

13) 24 sc (24)

14) (2 sc, dec) * 6 (18)

15) 18 sc (18)

16) (1 sc, dec) * 6 (12)

Change color to white

17) 12 sc (12)

18) (1 sc, inc) * 6 (18)

19) (2 sc, inc) * 6 (24)

20-23) 24 sc (24) – 4 rows

24) (2 sc, dec) * 6 (18)

We insert the eyes between 21 and 22 next to each other at a distance of 3 sc.

25) (1 sc, dec) * 6 (12)

26) 6 dec (6)

We are stuffing. We insert the thread into the needle, pick up each of the 6 stitches and

tighten the hole. Fasten the thread, cut and hide the tip.

Next, we knit a collar. We attach the goldec thread on the back of the head

snowman to the top golden row and make 2 ch.

Next, go around the neck, making 2 DC in each loop. In the end

we connect the columns, fasten the thread, cut and hide.

For the front wall of the 9th row

we knit with a holdec color 30 sc.

We insert the hook into the loops from the bottom

side.

Legs (2 parts, white):

1) 6 sc into magic ring (6)

2) 6 inc (12)

3-4) 12 sc (12) – 2 rows

5) (1 sc, dec) * 4 (8)

6) 8 sc (8)

We are stuffing. Fold the edges together and

we knit 3-4 sc.

We fix the thread, cut it and hide it.

Mittens (2 parts, gold color):

1) 6 sc into magic ring (6)

2-3) 6 sc (6) – 2 rows

Knit a finger:

4) 3 DC in 1 base and

 with 1 vertex, 5 sc (6)

5) 6 sc (6)

6) 6 inc (12)

We fix the thread, cut it and hide it. Do not stuff.

Handles (2 parts, brown smooth

yarn):

1) 6 sc into magic ring (6)

2-14) 6 sc (6) – 13 rows

Fold the edges together and knit 2-3

sc. Leave the thread for sewing. Not

stuffed.

Spout (orange smooth yarn):

1) 5 sc into magic ring (5)

2) 5 sc (5)

3) (1 sc, inc) * 2, sc (7)

4) 7 inc (14)

Leave the thread for sewing.

Do not stuff.

Hat (gold color):

1) 6 sc into magic ring (6)

2) 6 inc (12)

3) (1 sc, inc) * 6 (18)

4) (2 sc, inc) * 6 (24)

5) (3 sc, inc) * 6 (30)

6) 30 sc turn (30)

7-8) 30 sc (30) – 2 rows

Next, we knit a visor. Make 2 ch.,

turn knitting 180 degrees.

9) 8 DC, ch., Turn

10) 8 sc

Fasten the thread, cut and hide.

To tie the left ear of the cap, attach the thread to the left column

from the visor (when viewed from above) using sc. And we knit:

1) 7 sc, ch, turn

2) 7 sc, ch, turn

3) from the 2nd loop from the hook:

6 sc, ch, turn

4) from the 2nd loop from the hook:

2 dec, sc, 2 dec

Fasten the thread, cut and hide.

To tie the right ear caps,

attach the thread using sc with

the other side of the visor, but already

from inside the cap. And then we knit according to the scheme

left ear.

Next, bend the visor up and sew in the middle 1-2

stitches to the hat with matching sewing thread or white. Hiding all the ends

strings.

The hat is ready!

Assembly and design

First, sew a snowman a nose left orange thread on

circle. Then we embroider the mouth with a red thread.

We insert the handles into the mittens and fix them there by flashing

through a few stitches. This can be done with ordinary sewing.

a thread. She will be absolutely invisible on the toy. But so that when washing is not

there are surprises, it is better to take the threads of white or in tone

the details.

Sew the handles to the body (with the left threads) immediately below

a collar on both sides of the body.

Sew the legs with sewing thread in several additions for 5-6

row, placing them as shown in the photo and pre-jokes

with pins.

Abbreviations:

SC – single crochet

İNC – increase

DEC – decrease

CH – chain

Mike Wazowski.

Materials:

Alize Cotton gold (55-white; 60-black; 287-turquoise) – eyes, fingers; (385-green) – mouth

Alize Cotton gold plus (612-neon green) – primary color

Hooks – No. 3; No. 3,5

Important: if you use the same yarn, then we knit – Cotton gold plus (in one thread); Cotton

gold (in two threads), since the yarn is different in thickness !!!

Body head

Knitting in green (in one thread), crochet No. 3.5

1.6 sc in amigurumi ring

2. (inc) * 6 (12)

3. (1 sc, inc) * 6 (18)

4. (2 sc, inc) * 6 (24)

5. (3 sc, inc) * 6 (30)

6. (4 sc, inc) * 6 (36)

7. (5 sc, inc) * 6 (42)

8. (6 sc, inc) * 6 (48)

9. (7 sc, inc) * 6 (54)

10. (8 sc, inc) * 6 (60)

11. (9 sc, inc) * 6 (66)

12. (10 sc, inc) * 6 (72)

13. (11 sc, inc) * 6 (78)

14. (12 sc, inc) * 6 (84)

15. (13 sc, inc) * 6 (90)

16. (14 sc, inc) * 6 (96)

17. (15 sc, inc) * 6 (102)

18. (16 sc, inc) * 6 (108)

19. (17 sc, inc) * 6 (114)

20. (18 sc, inc) * 6 (120)

21. (19 sc, inc) * 6 (126)

22. (20 sc, inc) * 6 (132)

23-44. 132 sc (can be done 2-3 rows more)

45. (31 sc, dec) * 4 (128)

46. ​​(30 sc, dec) * 4 (124)

47. (29 sc, dec) * 4 (120)

48. (28 sc, dec) * 4 (116)

49. (27 sc, dec) * 4 (112)

50. (26 sc, dec) * 4 (108)

51. (25 sc, dec) * 4 (104)

52. (24 sc, dec) * 4 (100)

53. (23 sc, dec) * 4 (96)

54. (22 sc, dec) * 4 (92)

55. (21 sc, dec) * 4 (88)

56. (20 sc, dec) * 4 (84)

57. (19 sc, dec) * 4 (80)

58. (18 sc, dec) * 4 (76)

59. (17 sc, dec) * 4 (72)

60. (16 sc, dec) * 4 (68)

61. (15 sc, dec) * 4 (64)

62. (14 sc, dec) * 4 (60)

63. (13 sc, dec) * 4 (56)

64. (12 sc, dec) * 4 (52)

65. (11 sc, dec) * 4 (48)

66. (10 sc, dec) * 4 (44)

67. (9 sc, dec) * 4 (40)

68. (8 sc, dec) * 4 (36)

69. (7 sc, dec) * 4 (32)

70. (6 sc, dec) * 4 (28)

71. (5 sc, dec) * 4 (24)

72. (4 sc, dec) * 4 (20)

73. (3 sc, dec) * 4 (16)

74. (2 sc, dec) * 4 (12)

75. (1 sc, dec) * 4 (8)

76. (dec) * 4 (4), sl-st – leave the thread, sew the hole.

Toes (6 pieces):

Start knitting in white (in two threads!), Hook number 3

1.6 sc in amigurumi ring

2. (inc) * 6 (12)

3 – 5. 12 sc

Change color to green (in one thread), hook number 3.5

6-15. 12 sc, sl-st

Foot:

Knit in green (in one thread), hook number 3,5

16. Connect the fingers – 12 sc (on the first finger), 6 sc (on the second finger), 12 sc (on

third finger), 6 sc (on the second finger) (36)

17. 36 sc

18.34 sc (2 dec on the sides of the foot)

19.34 sc

20. 32 sc (2 dec on the sides of the foot)

21. 32 sc

22.30 sc (2 dec on the sides of the foot)

23.30 sc

24.28 sc (2 dec on the sides of the foot)

25.26 sc (2 dec on the sides of the foot)

26.24 sc (2 dec on the sides of the foot)

27 – 29.24 sc

30. (2 sc, dec) * 6 (18)

31. (1 sc, dec) * 6 (12)

32. (decrease) * 6, sl-st (6), leave the thread, sew the hole.

Repeat with the second leg.

Legs: (2 pieces)

Knit in green (in one thread), hook number 3,5

Dial a chain of 18 ch, connect into a ring

1.18 sc

2.18 sc

3.16 sc (2 decreases)

4.14 sc (2 decreases)

5 – 20. 14 sc

21.3 sc, 7 dc (knee), 4 sc (14)

22 – 31.14 sc

32.16 sc (2 increments)

33 – 37.16 sc

38. 18 sc (2 increments)

39. 20 sc (2 increments)

40. 20 sc, sl-st – leave the thread for sewing.

Fingers (6 pcs):

Start knitting in white (in two threads!), Hook number 3

1.6 sc in amigurumi ring

2. (1 sc, inc) * 3 (9)

3 – 4. 9 sc

Change color to green (in one thread), hook number 3.5

5 – 12.9 sc, sl-st

Similarly, tie another five fingers.

13. Connect the fingers (three fingers on each hand) – 9 sc (on the first finger), 4 sc (on

second finger), 9 sc (on the third finger), 5 sc (on the second finger) (27)

14 – 18. 27 sc

19.26 sc (1 decrease)

20. 24 sc (2 side reductions)

21. (2 sc, dec) * 6 (18)

22. 14 sc (4 decreases, roughly distribute in a circle)

23 – 24. 14 sc

25. 12 sc (2 decreases)

26 – 40. 12 sc

41. 4 dc (elbow), 8 sc (12) – dc do where your elbows are!

42 – 59. 12 sc, sl-st – leave the thread for sewing.

Thumbs (2 pcs):

Start knitting in white (in two threads), hook number 3

1.6 sc in amigurumi ring

2. (1 sc, inc) * 3 (9)

3 – 4. 9 sc

Change the color to green (we knit in one thread), hook number 3,5

5 – 10. 9 sc, sl-st – leave the thread for sewing.

Similarly, make the second finger and sew the fingers to the hand (I have them tied into the hand).

Eye:

We start to knit in black (in two threads), hook number 3

1.6 sc in amigurumi ring

2. (increase) * 6 (12)

Change the color to blue (in two strands), hook number 3

3. (1 sc, inc) * 6 (18)

4. (2 sc, inc) * 6 (24)

5. (3 sc, inc) * 6 (30)

Change color to white (in two threads), hook number 3

6. (4 sc, inc) * 6 (36)

7. (5 sc, inc) * 6 (42)

8. (6 sc, inc) * 6 (48)

9. (7 sc, inc) * 6 (54)

10. (8 sc, inc) * 6 (60)

11. (9 sc, inc) * 6 (66)

12. (10 sc, inc) * 6 (72)

13. (11 sc, inc) * 6 (78)

14. 78 sc, sl-st – leave the thread for sewing

Embroider a pattern of iris with dark blue threads, embroider a highlight with white.

Eyelids around the eye (2 pcs):

Dial a chain of 32 ch starting from the second loop

1. 3 sc, 25 hdc, 3 sc – leave the thread for sewing.

Fold above the eye:

Dial a chain of 27 ch starting from the second loop

1. 1 hdc, 24 sc, 3 hdc in one loop, 24 sc, 2 hdc in one loop

2. İnc dc, 24 dc, 3 inc dc, 24 dc, 2 inc dc

3. (1 dc, inc), 24 dc, (1 dc, inc) * 3, 24 dc, (1 dc, inc) * 2

4. (1 dc, 1hdc, inc hdc), 24 sc, 1 hdc, 1 dc, inc dc, 2 dc, inc dc, 1 dc, 1 hdc,

inc hdc, 24 sc, 1 hdc, 1 dc, inc dc, 2 dc, inc dc, sl-st – set the thread for

sewing on.

Horns (2 pcs):

White (in two threads), hook number 3

1.4 sc in amigurumi ring

2. (inc) * 4 (8)

3. (1 sc, inc) * 4 (12)

4. (3 sc, inc) * 3 (15)

5. (4 sc, inc) * 3 (18)

6 – 8. 18 sc, sl-st – leave the thread for stitching.

Green color (in one thread), hook number 3,5

Dial a chain of 24 ch, connect into a ring

1-2. 24 sc, sl-st – leave the thread for sewing.