Amigurumi Cute Unicorn Free Crochet Pattern
Welcome to our website where you can find the most beautiful and highest quality samples of Amigurumi patterns. All the amigurumi patterns you can’t find are available on our website. Every day we continue to share new amigurumi patterns for you. Stay tuned to reach these amigurumi patterns before anyone else
Necessary materials:
Yarn “Cotton Gold” from Alize or “JEANS” (YarnART)
– the main color is pink 1 motochek, 50 gr.
– blue, green, lilac, hot pink – about half a skein, 25 gr.
hook 1.75
For the peephole:
– half beads or eyes on a secure mount, size 12 or 14 mm.,
– Firth blue or blue,
– cilia.
Filler – syntepuh (holofiber),
– thread for tightening (I have dental floss),
– long needle
– a joint for fastening 2.0 or 2.5 cm,
or a cotter pin from 2.5 to 3.5 cm in size, disks for a cotter pin with a diameter of 2.0 cm.
(2.5 cm.) And 3.0 – 3.5 cm. (You can two disks of 2.0 – 2.5 cm.)
– glue moment crystal (gel)
– plastic to strengthen the legs,
– beads for decoration.
For the dress: yarn “Iris” of any color 2 hanks, hook 1.25.
You can tie the Unicorn from any strings that you
like a matching crochet and you’ll get a unicorn
other desired size.
Front legs (2 parts):
Color: Hot Pink
1r. 6sc into magic ring (6)
2 p. 6 inc (12)
3 p. (1sc, inc) * 6 times (18)
4 p. (2sc, inc) * 6 times (24)
5 p. 24sc knit perpendicular
6-9r. 24sc
Change the thread to pink (main), while leaving a long end
for tying a row (about 40 – 45 cm.) and bring it to the front side.
10 p. 24sl-st tie for the back half loops. We try not to tighten much.
11 p. (2sc, dec) * 6 (18) – knit for the back half loops.
Return to the left thread for tying and tie with connecting
columns (sl-st) on the left front half loops of the 10th row (main
color), pull the thread inward and fasten!
Cut circles from plastic or cardboard on the diameter of the legs and paste.
We try on the size, circle the base of the leg, cut out a circle,
try on. If everything suits, the base is tight, but does not bulge, not
stretches the sole, boldly cut out the second circle.
12-17r. 18sc
It’s convenient to fill the leg, check how the liner lies.
18 p. 3dec, 12sc (15) – for the right leg
(For the left leg, make a decrease at the end of the row – 12sc, 3dec)
19-25r. 15sc
26 p. (3sc, dec) * 3 (12)
Fill the leg, carefully work out the place of the bend, roll right into
hands, give the desired shape.
27 P. 12sc
28 p. 6dec (6)
Close the hole, hide the thread.
Rear legs (2 parts):
Color: Hot Pink
1r. 6sc into magic ring (6)
2 p. 6 inc (12)
3 p. (1sc, inc) * 6 times (18)
4 p. (2sc, inc) * 6 times (24)
5 p. (3sc, inc) * 6 times (30)
6 p. 30sc knit perpendicular
7-10r. 30sc
Change the thread to pink (main), while leaving a long end
for tying a row (about 45-50 cm.) and bring it to the front side.
11 p. 30sl-st tie for back half loops
12 p. (3sc, dec) * 6 (24) to connect for the back half loops
Return to the left thread for tying and tie with connecting
with columns (sl-st) on the left front half loops of the 11th row, pull out
thread inside and fasten!
Cut circles from plastic or cardboard on the diameter of the legs and paste.
13-19r. 24sc
20 P. 9sc, 6inc, 6sc, 3sl-st (30)
21 P. 3sl-st, 24sc, 3sl-st (30)
22 p. 3sl-st, 6sc, 6dec, 9sc (24)
Fill the leg, align the liner.
23-29 P. 24sc
30 P. (2sc, dec) * 6 (18)
31 P. 18sc
32 P. (1sc, dec) * 6 (12)
Fill the leg, carefully work out the place of the bend, knee, ride
right in the hands, give the desired shape.
33 P. 6dec (6)
Close the hole, hide the thread.
Head
We knit with a soft pink thread (main),
NOTE: if you use a joint to attach your head, then for
the convenience of securing it, immediately tie the first 9 rows of the body from
the other end of the ball and fix the joint (connect the head and torso) to
stuffing head. Then continue to knit your head to the end.
When using a joint to fasten the head, the beginning of knitting
(Amigurumi ring or first air loop) should be such
diameter, so that the leg of the joint entered it, it is quite thick in the joint.
DO NOT TIGHTEN STRONGLY!
1r. 6sc into magic ring (6)
2 p. 6 inc (12)
3 p. (1sc, inc) * 6 times (18)
4 p. (2sc, inc) * 6 times (24)
5 p. (3sc, inc) * 6 times (30)
6 p. (4sc, inc) * 6 times (36)
7 p. (5sc, inc) * 6 times (42)
8 p. (6sc, inc) * 6 times (48)
9 p. (7sc, inc) * 6 times (54)
10-17r. 54sc
18 p. (8sc, inc) * 6 times (60)
19-24r. 60sc
25 P. (8sc, dec) * 6 times (54)
26 p. (7sc, dec) * 6 times (48)
27 P. (6sc, dec) * 6 times (42)
28 p. (5sc, dec) * 6 times (36)
Install a joint or cotter pin,
detail to fill.
29 P. (4sc, dec) * 6 times (30)
30 P. (3sc, dec) * 6 times (24)
31 P. (2sc, dec) * 6 times (18)
Stuff your head to the end
32 P. (1sc, dec) * 6 times (12)
33 P. 6 dec (6)
Close the hole, hide the thread.
Corpuscle:
I knit on top!
We knit with a soft pink thread (main),
1r. 6sc into magic ring (6)
2 p. 6 inc (12)
3 p. (1sc, inc) * 6 times (18)
4 p. (2sc, inc) * 6 times (24)
5 p. (3sc, inc) * 6 times (30)
6-9r. 30sc
Attach the head by securing the cotter pin.
10 p. (4sc, inc) * 6 times (36)
11 p. 36sc
12 p. (5sc, inc) * 6 times (42)
13 P. 42sc
14 p. (6sc, inc) * 6 times (48)
15-26 r. 48sc
27 P. (6sc, dec) * 6 times (42)
28 p. (5sc, dec) * 6 times (36)
29 P. (4sc, dec) * 6 times (30)
Detail fill
30 P. (3sc, dec) * 6 times (24)
31 P. (2sc, dec) * 6 times (18)
32 P. (1sc, dec) * 6 times (12)
33 P. 6 dec (6)
Close the hole, hide the thread.
Muzzle
We knit with a soft pink thread (main),
1r. 6sc into magic ring (6)
2 p. 6 inc (12)
3 p. (1sc, inc) * 6 times (18)
4 p. (3sc, 3sc in one loop, 4sc, 3sc in one loop) * 2 times (26)
5-6r. 26sc (one more row can be knitted at will)
Leave a long end for sewing.
Horn:
In yellow, you can add shine.
Chain of 12CH, close in a circle (leave the end for sewing)
1-2r. 12sc
3 p. dec, 10sc (11)
4 p. dec, 9sc (10)
5 p. 10sc
6 p. dec, 8sc (9)
7 p. dec, 7sc (8)
8 p. 8sc
9 p. dec, 6sc (7)
10 p. dec, 5sc (6)
11 p. dec, 4sc (5)
12 p. dec, 3sc (4)
Next, close the needle sharply.
Ears (2 parts):
We knit with a soft pink thread (main),
1r. 6sc into magic ring (6)
2 p. (inc, 1sc) * 3 times (9)
3 p. (inc, 2sc) * 3 times (12)
4 p. (inc, 3sc) * 3 times (15)
5 p. (inc, 4sc) * 3 times (18)
6 p. (inc, 5sc) * 3 times (21)
7 p. (inc, 6sc) * 3 times (24)
8 p. 24sc
9 p. (6sc, dec) * 3 times (21)
10 p. (5sc, dec) * 3 times (18)
11 p. (4sc, dec) * 3 times (15)
12 p. (3sc, dec) * 3 times (12)
13 P. (2sc, dec) * 3 times (9)
14 p. (1sc, dec) * 3 times (6)
Leave the end for sewing.
SPIRALS:
Dial 80-100 ch
1r. dc, increase, dc, increase …. repeat to the end of the row.
Tie 12 pieces for the head and 8 for the tail.
Curls can be knitted separately and then sewn during assembly, and
You can knit directly from the head, if it is convenient for you.
Assembly:
Fill the parts carefully, tighten and close the holes, threads
hide the remaining ones.
Sew on the muzzle. Remember to add filler. I AM
I sew the muzzle lower, the lower edge of the muzzle is located
about 7-8 row of head. The muzzle is a little rectangular,
position, respectively, exactly.
Sew on a horn.
Make eye make-ups.
They are located just at the level of the upper edge of the muzzle, in
side to retreat about 3 columns on each side.
Then sew on the curls, if you did not fasten them immediately.
Sew on the ears (the lower edge of the eyelet is attached at about 22-23
a row of the head and on the side (in height) sew the eye to the 25th row).
We make out the eyes:
Cut eye liner from felt, color blue or turquoise.
At the eye, we bite off the leg for fastening with pliers and remain alone
eye – half beads. Glue felt backing to eyes and glue
eyes to the head in places of tightening.
Stick cilia. BUT! better stick them at the very end,
after assembly.
Install the upper legs.
Try on and fix the lower legs, sew on the tail.
Unicorn is ready, you can put it on!
DRESS.
(the sundress is connected based on the description of the dress for the doll from talem21)
Yarn “iris” in two colors, hook 1.25
We start to knit with a yoke.
Dial a chain of 8ch + 2 lifting loops and knit in rotary rows
on 8DC about 30 rows (you need to try on a unicorn, so
how the thickness can be different).
Next, we knit the base – the grid: (dc, ch) * repeat the desired amount until
end of row and so on 10 rows. Moreover, to expand the hem
arbitrarily make increases in the grid (knit additional DC and
ch) something like this:
in the 2nd row – make an increase in each 5 column,
in the 3rd row – make an increase in each 7 column
in the 4th row – make an increase in each 9 column
in the 6th row – make an increase in each 11 column
in the 7th row – make an increase in each 13 columns
in the 9th row – make an increase in each 15 columns
Next, we make the bottom strapping according to the scheme
Then we knit the upper tier according to the same strapping scheme (we introduce the hook
for the yoke loop) and the middle tier – in the fifth row.
Lami.
Try on a dress and mark the location of the straps in front,
considering that their initial width is 5 columns.
Then, right on the yoke, in the marked place, knit 5DC, turn,
5DC, rotate, dec, 3DC, rotate, 4DC, rotate, dec, 2DC,
rotate, 3DC, rotate, 3DC to the desired length (approximately 5-6
rows).
Try on, if the length of the strap is enough, then pull the thread,
trim and sew the strap on the back, close to the clasp.
Check if a hoof passes through your little strap!
The second is connected in the same way.
Next, tie the entire top of the sarafan: (sc, sc, 3ch) * desired
number of times.
When tying the edges of the coquette along the back, make loops on one side
(air loops), try on the diameter of your button, and on the other
hand tie sc.
Sew on buttons.
PANTIES
Dial 34ch + 3ch for lifting or approximately 8 cm (half
circumference of the waist) and knit 3 rows with an elastic band alternating DC convex and
DC concave.
4-5r. 34DC
6 p. dec, 30DC, dec,
7 p. dec, 28DC, dec,
Next, we continue to knit the rotary rows, making 2 decreases with
each side until 10 columns remain.
– Knit 2 rows straight at 10DC.
Then we continue to knit the DC rotary rows, but already do
increments on each side, one – 2 rows,
– and on each side 2 increments before the total
columns will reach 30.
Try on if the tail reaches the height, knit a hole for
ponytails – for this we will knit each side of the back of the panties
separately:
– 2 increments, 12DC, turn,
– Knit 2 or 3 rows at 16DC,
– Knit 3 rows with an elastic band 1 * 1.
Tie the left side the same way, skipping 2 columns, but the first row
mirror – first knit 12DC, then 2 increments.
Ponytail hole to tie SC, making on one side
buttonhole (you can tie the ties).
Sew side seams, tie in a circle for beauty: (2sc, 3ch) * desired
number of times.
Sew on a button.
That’s it, dress up our Magic Unicorn and enjoy!
Or so we dress the unicorn warmly.